Allied-telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT Manual de usuario descargar pdf (Pagina 272)

AlliedView™-EMS 3.11 Device Management Guide Page 272 of 402

Displays Port Mirroring parameters and allows you to create/delete a port mirror.

Note - The current firmware version does not allow the Port Mirroring Status

parameter to be set to 'enabled' if, upon device startup, the Port Mirroring feature is

disabled.

Note - L2+ Models: The current firmware version does not allow the Mirroring

Source Port (Ingress) and Mirroring Source Port (Egress) parameters to be set to

NULL.

Note - L3 Models: The current firmware version does not allow the Mirroring

Source Port (Ingress) and Mirroring Source Port (Egress) parameters to be

configured.

Note - The current firmware version does not allow the Mirroring Destination Port

parameter to be set to 0.

Note - The Mirroring Source Module, Mirroring Source Port and Mirroring

Destination Module parameters are not applicable to the AT-9400 series and should

be ignored.

MAC Address Security

Displays MAC Address Security parameters and allows you to set the security level

for dynamic and static MAC addresses learned and assigned to a port.

DoS Defense

Displays DoS Defense parameters and allows you to enable/disable a defense

mechanism on a port.

Note - The current firmware version returns 'noSuchName' for the Module ID and

Port Number parameters under each Attack Type option.

Note - The Attack Mirror Port parameter under each Attack Type option is already

obsolete and should be ignored.

Note - The Attack Mirror Port Status parameter is not applicable to the SYN Flood

and Smurf defenses and should be ignored.

LAN IP Subnet

Displays LAN IP address and subnet mask

SYN Flood Config

Displays syn flood attack type configuration

Smurf Config

Displays smurf attack type configuration.

1 2 ... 267 268 269 270 271 272 273 274 275 276 277 ... 401 402

Sin comentarios

Allied-telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT Manual de usuario Pagina 272