Allied-telesis AT-WL2411 Manual de usuario descargar pdf (Pagina 63)

AT-WL2411 Version 1.80 Installation and User’s Guide

Configuring the Ethernet Settings

Many of the standard Ethernet settings are configured in the TCP/IP

Settings screen. For help, see Configuring the TCP/IP Settings on page

52. In the Ethernet Settings screen, you can

❑ Enable or disable the link status check. Enable this parameter if

you want the access point to periodically check its Ethernet

connection. If it loses the connection, this access point can no

longer be the root access point and any end devices that are

connected to this access point (whether or not it is the root) will

roam to a different access point. The access point will attempt to

reconnect to the spanning tree through one of its radio ports.

Disable this parameter if this access point must be the root access

point.

❑ Set the hello period, which defines how often the access point

sends out multicast hello packets so it can dynamically discover

and test connections to other routers on the network. Once this

information is learned, the access point and routers can exchange

routing information.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 235 236

Sin comentarios

Allied-telesis AT-WL2411 Manual de usuario Pagina 63