Allied-telesis AT-WL2411 Manual de usuario descargar pdf (Pagina 137)

AT-WL2411 Version 1.80 Installation and User’s Guide

137

These security features and solutions are listed below in the order of

amount of security and ease of use (most basic/least secure to most

secure). Allied Telesyn recommends you at least change the default

parameters, use basic security (WEP 64/128 security or security ID), and

enable secure IAPP and secure wireless hops (Steps 1 through 4).

To change the security features, perform the following procedure:

1. Change the default parameters on the access points and on the

wireless end devices.

Change the SSID from its default value of atilan. For help, see

Configuring the IEEE 802.11b Radio on page 111.

2. Enable/disable access methods. For example, if you are not using

Telnet sessions to configure or manage your access point, you can

disable this access method. For help, see Enabling Access Methods on

page 139.

3. Enable secure IAPP and secure wireless hops. Even if you are not

configuring an 802.1x-enabled network, you can enable secure IAPP,

which prevents unauthorized users from joining the spanning tree.

For help, see Enabling Secure IAPP and Secure Wireless Hops on page

141.

4. For 802.11b, configure basic WEP 64/128 security. You can configure

up to four different WEP keys on the access point and most wireless

end devices, and then you specify which key is being used to encrypt

data. You should periodically change which WEP key these devices

use. For help, see Configuring WEP 64/128 Security on page 148.

5. Use a password server to maintain a list of authorized users who can

configure and manage the access points.

Or, change the default login for users who need to be able to

configure or manage the access point. For help, see Setting Up

Logins on page 143.

1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 235 236

Sin comentarios

Allied-telesis AT-WL2411 Manual de usuario Pagina 137