Allied-telesis AT-WL2411 Manual de usuario descargar pdf (Pagina 43)

AT-WL2411 Version 1.80 Installation and User’s Guide

Using a Web Browser

After you have configured the IP address and other basic network

parameters as described in Assigning an IP Address on page 41, you can

manage your access point using a Web browser.

You must know the IP Address of the access point to manage it remotely.

If a DHCP server assigned the IP Address, you must determine the IP

Address from the DHCP server.

Only one session can be active on the access point at a time. If your

session terminates abruptly or a new sign-on screen appears, someone

else may be using the access point.

When using the Web to establish remote management of your access

point, follow these guidelines:

❑ Your session will terminate if it is not used for 15 minutes

❑ Console Command mode is not available

To establish a Web browser session with the AT-WL2411, perform the

following procedure:

1. Type the DHCP server-assigned IP Address or the IP Address you

assigned to the AT-WL2411 in the address field of your Web browser.

Note

If you access the Internet using a proxy server, you must add the IP

Address to your exceptions list. The exceptions list contains the

addresses that you do not want to use with a proxy server.

2. Press <Enter>. The Access Point Login screen as shown in Figure 13 is

displayed.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 235 236

Sin comentarios

Allied-telesis AT-WL2411 Manual de usuario Pagina 43