Allied-telesis AT-WL2411 Manual de usuario descargar pdf (Pagina 156)

Configuring Security

156

Configuring the

Access Point as

Authenticator

The access point, when acting as an authenticator, receives requests

from end devices that want to communicate with the network and

forwards these requests to the authentication server. It also distributes

the WEP keys to end devices that are communicating with it. Before you

configure the access point as an authenticator, the access point should

be installed and configured to communicate with the wireless end

devices.

To configure the access point as an authenticator, perform the following

procedure:

1. From the Main Menu, select Security then 802.1x. The 802.1x screen

as shown in Figure 59 is displayed.

Figure 59 802.1x Screen

2. Select the down arrow on the right side of the 802.1x Authentication

field then choose the radio networks that you want to implement

802.1x security then select Submit Changes.

3. Configure the parameters for 802.1x security. The parameters are

described below.

1 2 ... 151 152 153 154 155 156 157 158 159 160 161 ... 235 236

Sin comentarios

Allied-telesis AT-WL2411 Manual de usuario Pagina 156