Allied Telesis Rapier 16Fi-FX Guía de instalación descargar pdf (Pagina 43)

Software Version 2.9.1 43

Software Version 2.9.1

C613-10486-00 REV C

show debug active

Syntax SHow DEBug ACTIve={ALL|module}

Description For IP debugging, this command now displays the value of the IP debugging

timeout (Figure 7).

Figure 7: Example output from the show debug active=ip command

Offline Whether the hostnames are set to offline mode.

Refer to the DynDNS website for offline redirection

options, available at:

http://www.dyndns.com/services/dns/dyndns/faq.html

Primary WAN Interface The IP interface used for the main WAN connection.

Secondary WAN Interface The IP interface used for the backup WAN connection.

Server IP The IP address of Dynamic DNS server resolved by DNS.

IP in DynDns The IP address assigned to the listed host names at the

last update.

Current IP The latest IP address assigned to local WAN connection.

Update Failed - Suggested action User action to take if the last update failed.

Table 4: Parameters in output of the show ddns command (cont.)

Parameter Meaning

----------------------------------------------------------

IP Debug Timeout: 30 seconds

IP Debug Options Enabled:

IP Packet

IP ARP

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 282 283

Sin comentarios

Allied Telesis Rapier 16Fi-FX Guía de instalación Pagina 43