Allied Telesis Rapier 16Fi-FX Guía de instalación Pagina 248
- Pagina / 283
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Link Layer Discovery Protocol (LLDP) show lldp 33
Table 1: Parameters in output of the show lldp command
Parameter Meaning
LLDP global configuration
msgTxInterval The time interval in seconds between which the switch
transmits LLDPDUs on behalf of the LLDP agent. You can set
this using the set lldp txinterval command.
msgTxHold The current multiplier on msgTxInterval. You can set this
using the set lldp txhold command.
reinitDelay The time in seconds that the switch waits after a port is
disabled, before it begins the LLDP re-initialization process.
You can set this using the set lldp reinitdelay command.
txDelay The time in seconds, that the switch waits between
transmitting successive LLDPDUs initiated by value or status
changes in the local LLDP MIB. You can set this using the set
lldp txdelay command.
Notification interval The time in seconds that elapses between LLDP
notifications. You can set this using the set lldp
notification interval command.
Management address The IPv4 management address the switch advertises for
your local LLDP agent. You can set this using the set lldp
managementaddress command.
Total current neighbours The total number of active neighbours that are currently
associated with your local system.
Too many neighbours events The number of times the toomanyneighbours event has
occurred since the last LLDP re-initialization.
System errors Major LLDP system errors that could affect LLDP operation.
If a number greater than 0 is displayed, contact your System
Administrator.
LLDP port configuration
Port The port number.
adminStatus The LLDP transmission and reception status of the port, one
of:
• txOnly
Transmission is enabled only
• rxOnly
Reception is enabled only
• txAndrx
Both transmission and reception are enabled
• disabled
Both transmission and reception are disabled
You can enable a value of txOnly, rxOnly, or txAndrx for
the port using the enable lldp port command. You can
disable txOnly, rxOnly, or txAndrx for the port using the
disable lldp port command.
Notifications The current notifications setting, either ‘enabled’ or
‘disabled’. You can set this using the disable lldp
notifications or enable lldp notifications commands.
- Software Version 2.9.1 1
- 2 Release Note 2
- Release Licences 5
- Upgrading the GUI File 5
- Backwards Compatibility 6
- Overview of New Features 7
- AT-8624POE Fan Enhancements 9
- C613-10486-00 REV C 10
- VPN Configuration Wizards 11
- Command Changes 12
- System Enhancements 13
- Command Reference Updates 14
- Switching Enhancements 18
- PoE Firmware Upgrade 20
- SHDSL Enhancements 23
- Bridging Enhancements 26
- Software Version 2.9.1 27 27
- Training VLAN VID=2 28
- PPP Link 28
- Software Version 2.9.1 31 31
- Syntax SHow BRIDge 32
- Dynamic DNS Client 33
- Within a Subnet 34
- IP Debug Timeout 35
- Software Version 2.9.1 37 37
- Software Version 2.9.1 41 41
- Syntax SHow DDNS 42
- DHCP Enhancements 45
- DHCP Snooping Enhancements 50
- IP Multicasting Enhancements 55
- OSPF Enhancements 59
- BGP Enhancements 61
- IPv6 Enhancements 63
- ■ all static routes 64
- ■ all interface routes 64
- Firewall Enhancements 65
- Software Version 2.9.1 75 75
- ALG, use the command: 86
- Associations 88
- Changes to Local Commands 94
- IP Multicasting 95
- IP Multicasting 3 97
- IP Multicast Routing 98
- IP Multicasting 5 99
- PIM Dense Mode 100
- Configuring PIM Dense Mode 101
- General PIM-DM 102
- IP Multicasting 9 103
- PIM Sparse Mode 103
- 10 Software Reference 104
- Rendezvous point 105
- IP Multicasting 11 105
- 12 Software Reference 106
- Configuring PIM Sparse Mode 107
- Bootstrap router 108
- General PIM-SM 109
- IP Multicasting 17 111
- Configuring IGMP 112
- Static IGMP 113
- IGMP Proxy 114
- IGMP Snooping 116
- Downstream routers 117
- Fast Leave 118
- Query Solicitation 118
- IP Multicasting 25 119
- IGMP Filtering 120
- IGMP Throttling 122
- IP Multicasting 29 123
- Dynamic MVR 123
- Compatible MVR 123
- Immediate Leave 124
- Configuring MVR 124
- Configuration Examples 125
- Switch B 126
- Switch A 126
- Switch C 126
- Command Reference 134
- IP Multicasting enable pim 69 163
- [interface=vlan] 167
- ■ DVMRP Routers, 224.0.0.4 168
- ■ All PIM routers, 224.0.0.13 168
- ■ IGMP is enabled globally 170
- ■ the interface is active 170
- IP Multicasting set ip mvr 77 171
- 78 set pim Software Reference 172
- Syntax SHow IP IGMP DEBug 191
- Syntax SHow PIM COUnters 197
- Table 11 on page 104) 197
- Syntax SHow PIM INTerface 202
- VLAN (such as vlan1, vlan1-1) 202
- Syntax SHow PIM ROUte 205
- Syntax SHow PIM RPSet 212
- Introduction 217
- Link Layer Discovery Protocol 217
- Type Length Values 218
- Transmission and Reception 219
- Transmission 220
- Reception 220
- Storing LLDP Information 221
- Configuring LLDP 223
- Monitoring LLDP 224
- LLDP Triggers 225
- 802.1AB-2005 251
- LLDP neighbours is displayed 255
- MAC-Forced Forwarding 259
- 2 Software Reference 260
- MAC-Forced 261
- Forwarding with 261
- DHCP snooping 261
- Isolating clients using VLANs 262
- Manually adding 263
- ■ ARP packets 264
- Debugging 265
- Logging 265
- 8 Software Reference 266
- See Also show macff interface 277
- Syntax SHOW MACFF DATABase 278
Relacionado con productos y manuales para Los conmutadores de red Allied Telesis Rapier 16Fi-FX
(44 paginas)
(51 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.079 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales