Allied-telesis AT-S95 CLI (AT-8000GS Series) Manual de usuario descargar pdf (Pagina 354)

Page 354

Allied Telesis

AT-8000GS Command Line Interface User’s Guide

Example

The following example sets a mac-based classification rule.

map mac macs-group

The map mac macs-group VLAN Configuration mode command maps a MAC address or a range of MAC

addresses to a group of MAC addresses. Use the no form of this command to delete a map.

Syntax

map mac mac-address {prefix-mask | host} macs-group group

no map mac mac-address {prefix-mask | host}

• mac-address — Specifies the MAC address to be entered to the group.

• prefix-mask — Specifies the Mask bits. The format is the MAC address format.

• host — Specifies all 1’s mask.

• group — Specifies the group number. (Range: 1 - 2147483647)

Default Configuration

This command has no default configuration.

Command Mode

VLAN Configuration mode

User Guidelines

There are no user guidelines for this command.

Example

The following example maps a MAC address or a range of MAC addresses to a group of MAC addresses.

show vlan macs-group

The show vlan macs-group privileged EXEC command displays MAC group information.

Syntax

show vlan macs-group

console(config)# vlan database

console(config-vlan)# map mac 00:08:78:32:98:78 9 macs-group 1

interface ethernet g17

console(config-vlan)# exit

console(config)# interface ethernet 1/g17

console(config-if)# switchport mode general

console(config-if)# switchport general map macs-group 1 vlan 2

console(config)# vlan database

console(config-vlan)# map mac 00:08:78:32:98:78 9 macs-group 1

interface ethernet g17

1 2 ... 349 350 351 352 353 354 355 356 357 358 359 ... 396 397

Sin comentarios

Allied-telesis AT-S95 CLI (AT-8000GS Series) Manual de usuario Pagina 354