Allied-telesis AT-S95 CLI (AT-8000GS Series) Manual de usuario Pagina 174

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 397
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 173
Page 174
Allied Telesis
AT-8000GS Command Line Interface Users Guide
Chapter 16.LLDP Commands
lldp enable (global)
The lldp enable Global Configuration mode command enables theLink Layer Discovery Protocol (LLDP). Use the
no form of this command to disable LLDP.
Syntax
lldp enable
no lldp enable
Parameters
This command has no parameter settings.
Default Configuration
LLDP is enabled.
Command Mode
Global Configuration mode.
User Guidlines
There are no guidelines for this command.
Example
The following example enables LLDP.
lldp enable (interface)
The lldp enable Interface Configuration mode command enables LLDP on an interface. Use the no form of this
command to disable LLDP on an interface.
Syntax
lldp enable [rx|tx|both]
no lldp enable
Parameters
rx — Receives only LLDP packets.
tx —Transmits only LLDP packets.
both — Receives and transmits LLDP packets (default).
console (config)# lldp enable
Vista de pagina 173
1 2 ... 169 170 171 172 173 174 175 176 177 178 179 ... 396 397

Comentarios a estos manuales

Sin comentarios