Allied-telesis AT-S95 CLI (AT-8000GS Series) Manual de usuario descargar pdf (Pagina 207)

100

101

Power over Ethernet Commands

Page 207

Default Configuration

This command has no default configuration.

Command Mode

Interface Configuration (Ethernet) mode

User Guidelines

There are no user guidelines for this command.

Example

The following example configures a description to an IP-phone to a powered device connected to Ethernet

interface 1/g16.

power inline priority

The power inline priority Interface Configuration (Ethernet) mode command configures the inline power

management priority of the interface. Use the no form of this command to return to the default configuration.

Syntax

power inline priority {critical | high | low}

no power inline priority

Parameters

•

critical — Indicates that operating the powered device is critical.

• high — Indicates that operating the powered device has high priority.

• low—Indicates that operating the powered device has low priority.

Default Configuration

The default setting is low priority.

Command Mode

Interface Configuration (Ethernet) mode

User Guidelines

There are no user guidelines for this command.

Example

The following example configures the device connected to Ethernet interface 1/g16 as a high-priority powered

device.

console(config)# interface ethernet 1/

g16

console(config-if)#

power inline powered-device

IP-phone

console(config)# interface ethernet 1/

g16

console(config-if)#

power inline priority high

1 2 ... 202 203 204 205 206 207 208 209 210 211 212 ... 396 397

Comentarios a estos manuales

Sin comentarios

Allied-telesis AT-S95 CLI (AT-8000GS Series) Manual de usuario Pagina 207

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Allied-telesis AT-S95 CLI (AT-8000GS Series)