Allied-telesis AT-8550 Manual de usuario descargar pdf (Pagina 7)

AT-9108, AT-8518, AT-8525, and AT-8550 User’s Command Guide

VLAN Commands

Command Description

config dot1p ethertype <ethertype> Configures an IEEE 802.1Q Ethertype. Use this command only if you

have another switch that supports 802.1Q, but uses a different

Ethertype value than 8100.

config gvrp {listen | send | both | none} {port

<portlist>}

Configures the sending and receiving GVRP information one or all a

ports. Options include the following:

❑

listen — Receive GVRP packets.

❑

send — Send GVRP packets.

❑

both — Send and receive GVRP packets.

❑

none — Disable the port from participating in GVRP

operation.

The default setting is both.

config protocol <protocol_name> [add |

delete] <protocol_type> <hex_value>

{<protocol_type> <hex_value>} ...

Configures a protocol filter. Supported <protocol_type> values

include:

❑

etype

❑

llc

❑

snap

The variable <hex_value> is a hexadecimal number between 0

and FFFF that represents either the Ethernet protocol type (for

EtherType), the DSAP/SSAP combination (for LLC), or the SNAP-

encoded Ethernet protocol type (for SNAP).

config vlan <name> add port <portlist> {tagged

| untagged}

Adds one or more ports to a VLAN. You can specify tagged port(s),

untagged port(s). By default, ports are untagged.

config vlan <name> delete port <portlist>

{tagged | untagged}

Deletes one or more ports from a VLAN.

config vlan <name> ipaddress <ipaddress>

{<mask>}

Assigns an IP address and an optional mask to the VLAN.

config vlan <name> protocol

[<protocol_name> | any]

Configures a protocol-based VLAN. If the keyword any is specified,

then it becomes the default VLAN. All packets that cannot be

classified into other protocol-based VLANs are assigned to the

default VLAN of that port.

config vlan <name> qosprofile <qosname> Configures a VLAN to use a particular QoS profile. Dynamic FDB

entries associated with the VLAN are flushed once the change is

committed.

config vlan <name> tag <vlanid> Assigns a numerical VLANid. The valid range is from 1 to 4095.

create protocol <protocol_name> Creates a user-defined protocol.

create vlan <name> Creates a named VLAN.

delete protocol <protocol> Removes a protocol.

delete vlan <name> Removes a VLAN.

disable gvrp Disables the Generic VLAN Registration Protocol (GVRP).

disable ignore-stp vlan <name> Allows a VLAN to use STP port information.

enable gvrp Enables the Generic VLAN Registration Protocol (GVRP). The default

setting is disabled.

1 2 3 4 5 6 7 8 9 10 11 12 ... 35 36

Comentarios a estos manuales

Sin comentarios

Allied-telesis AT-8550 Manual de usuario Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Allied-telesis AT-8550