Allied-telesis AT-8550 Manual de usuario descargar pdf (Pagina 16)

Access Policy Commands

Command Description

config access-profile <access_profile> add

{vlan <name> | ipaddress <ipaddress>

<subnet_mask>

Adds an IP address or VLAN name to the access profile. The entry

must be of the same type as the access profile (for example, IP

address).

config access-profile <access_profile> delete

{vlan <name> | ipaddress <ipaddress>

<subnet_mask>

Deletes an IP address or VLAN name from the access profile.

config access-profile <access_profile> mode

[permit | deny]

Configures the access profile to be one of the following:

❑

permit — Allows the addresses that match the access profile

description.

❑

deny — Denies the addresses that match the access profile

description.

The default setting is permit.

create access-profile <access_profile> type

[vlan | ipaddress]

Creates an access profile. Once the access profile is created, one or

more addresses can be added to it, and the profile can be used to

control a specific routing protocol

delete access-profile <access_profile> Deletes an access profile.

show access-profile <access_profile> Displays access-profile related information for the switch.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

Sin comentarios

Allied-telesis AT-8550 Manual de usuario Pagina 16