Allied-telesis AT-8550 Manual de usuario descargar pdf (Pagina 33)

AT-9108, AT-8518, AT-8525, and AT-8550 User’s Command Guide

IPX/RIP Commands

Command Description

config ipxrip add vlan [<name> | all} Configures one or all IPX VLANs to run IPX/RIP. IPX/RIP is enabled by

default when you configure the IPX VLAN.

config ipxrip delete vlan [<name> | all] Disables IPX/RIP on one or all interfaces.

config ipxrip {vlan <name> | all} max-packet-

size <number>

Configures the maximum transmission unit (MTU) size of the IPX/RIP

packet. the default setting is 432 bytes.

config ipxrip vlan [<name> | all] update-

interval <time> {hold-multiplier <number>}

Configures the update interval and hold multiplier for IPX/RIP

updates. This setting affects both the periodic update interval of

IPX/RIP and the aging interval of learned routes. The default update

interval is 60 seconds. The aging period is calculated using the

formula (update-interval * multiplier). The default multiplier is 3.

config ipxrip vlan [<name> | all] delay <msec> Configures the time between each IPX/RIP packet within an update

interval. The default setting is 55 milliseconds.

disable ipxrip Disables IPX/RIP on the router.

enable ipxrip Enables IPX/RIP on the router.

show ipxrip {vlan <name>} Displays IPX/RIP configuration and statistics for one or all VLANs.

unconfig ipxrip {vlan <name>} Resets the IPX/RIP settings on one or all VLANs to the default.

Removes import and export filters, and resets the MTU size, update

interval, and inter-packet delay.

1 2 ... 28 29 30 31 32 33 34 35 36

Sin comentarios

Allied-telesis AT-8550 Manual de usuario Pagina 33