Allied-telesis AT-8550 Manual de usuario descargar pdf (Pagina 30)

DVMRP Commands

Command Description

config dvmrp add vlan [<name> | all] Enables DVMRP one or all IP interfaces. If no VLAN is specified,

DVMRP is enabled on all IP interfaces. When an IP interface is

created, DVMRP is disabled by default.

config dvmrp delete vlan [<name> | all] Disables DVMRP on one or all IP interfaces. If no VLAN is specified,

DVMRP is disabled on all IP interfaces.

config dvmrp timer <route_report_interval>

<route_replacement_time>

Configures the global DVMRP timers. Specify the following:

❑

route_report_interval — The amount of time the

system waits between transmitting periodic route report

packets. The range is 1 to 2,147,483,647 seconds (68 years).

The default setting is 60 seconds. Because triggered update is

always enabled, the route report will always be transmitted

prior to the expiration of the route report interval.

❑

route_replacement_time — The hold-down time

before a new route is learned, once the previous route has

been deleted. The range is 1 to 2,147,483,647 seconds (68

years). The default setting is 140 seconds.

config dvmrp vlan [<name> | all] export-filter

[<access_profile> | none]

Configures DVMRP to filter out certain routes when performing the

route advertisement.

config dvmrp vlan [<name> | all] import-filter

[<access_profile> | none]

Configures DVMRP to filter certain routes received from its neighbor.

config dvmrp vlan [<name> | all] trusted-

gateway [<access_profile> | none]

Configures DVMRP to use the access policy to determine which

DVMRP neighbor is trusted and to receive routes from.

config dvmrp vlan <name> timer

<probe_interval>

<neighbor_timeout_interval>

Configures DVMRP interface timers. Specify the following:

❑

probe_interval — The amount of time that the system

waits between transmitting DVMRP probe messages. The

range is 1 to 2,147,483,647 seconds (68 years). The default

setting is 10 seconds.

❑

neighbor_timeout_interval — The amount of time

before a DVMRP neighbor route is declared to be down. The

range is 1 to 2,147,483,647 seconds (68 years). The default

setting is 35 seconds.

disable dvmrp Disables DVMRP on the system.

enable dvmrp Enables DVMRP on the system. The default setting is disabled.

show dvmrp {vlan <name> | route}} {detail} Displays the DVMRP configuration and statistics, or the unicast route

table. The default setting is all.

unconfig dvmrp {vlan <name>} Resets the DVMRP timers to their default settings. If no VLAN is

specified, all interfaces are reset.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 36

Comentarios a estos manuales

Sin comentarios

Allied-telesis AT-8550 Manual de usuario Pagina 30

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Allied-telesis AT-8550