Allied-telesis AT-8550 Manual de usuario descargar pdf (Pagina 23)

AT-9108, AT-8518, AT-8525, and AT-8550 User’s Command Guide

IP RIP Commands

Command Description

config rip add vlan [<name> | all] Configures RIP on an IP interface. If no VLAN is specified, then all is

assumed. When an IP interface is created, per-interface RIP

configuration is disabled by default.

config rip delete vlan [<name> | all] Disables RIP on an IP interface. When RIP is disabled on the interface,

the parameters are not reset to their defaults.

config rip garbagetime {<delay>} Configures the RIP garbage time. The timer granularity is 10

seconds. The default setting is 120 seconds.

config rip routetimeout {<delay>} Configures the route timeout. The timer granularity is 10 seconds.

The default setting is 180 seconds.

config rip rxmode [none | v1only | v2only |

any] {vlan <name>}

Changes the RIP receive mode for one or all VLANs. Specify:

❑

none — Drop all received RIP packets.

❑

v1only — Accept only RIP v1 format packets.

❑

v2only — Accept only RIP v2 format packets.

❑

any — Accept both RIP v1 and v2 packets.

If no VLAN is specified, the setting is applied to all VLANs. The default

setting is any.

config rip txmode [none | v1only | v1comp |

v2only] {vlan <name>}

Changes the RIP transmission mode for one or all VLANs. Specify:

❑

none — Do not transmit any packets on this interface.

❑

v1only — Transmit RIP v1 format packets to the broadcast

address.

❑

v1comp — Transmit RIP v2 format packets to the broadcast

address.

❑

v2only — Transmit RIP v2 format packets to the RIP

multicast address.

If no VLAN is specified, the setting is applied to all VLANs. The default

setting is v2only.

config rip updatetime {<delay>} Changes the periodic RIP update timer. The timer granularity is 10

seconds. The default setting is 30 seconds.

config rip vlan [<name> | all ] export-filter

[<access-profile> | none]

Configures RIP to suppress certain routes when performing route

advertisements.

config rip vlan [<name> | all] import-filter

[<access_profile> | none]

Configures RIP to ignore certain routes received from its neighbor.

config rip vlan [<name> | all] trusted-gateway

[<access_profile> | none]

Configures RIP to use the access list to determine which RIP

neighbor to receive (or reject) the routes.

disable rip Disables RIP.

disable rip aggregation Disables the RIP aggregation of subnet information on a RIP v2

interface.

disable rip export osfp Disables the distribution of OSPF routes into the RIP domain.

disable rip export static Disables the filtering of static routes.

disable rip poisonreverse Disables poison reverse.

disable rip splithorizon Disables split horizon.

disable rip triggerupdate Disables triggered updates.

enable rip Enables RIP. The default setting is disabled.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 35 36

Comentarios a estos manuales

Sin comentarios

Allied-telesis AT-8550 Manual de usuario Pagina 23

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Allied-telesis AT-8550