Allied Telesis Switch AT-9000/28 Manual de usuario descargar pdf (Pagina 58)

Chapter 4: Setting Port Parameters

Displaying the Port Parameters

The port numbering system in the AlliedWare Plus web browser interface

is different from the port numbering system in the CLI. For an example of

the port numbering equivalents for the first five ports, see Table 1.

Within the display, there is no differentiation between ports 25 through 28

and ports 25R through 28R. In the web interface, if you want to see if port

25 is connected versus port 25R, go to the home page and look at the

illustration of the switch. For an example of the home page, see Figure 4

on page 23.

To display the settings for all of the switch ports, do the following:

1. Select the Switching tab.

The Switching tab is displayed. See Figure 19.

Figure 19. Switching Tab with Port Tab

Table 1. Port Numbering the Web versus the CLI

Web Port Numbering CLI Port Numbering

port 1 port 1.0.1

port 2 port 1.0.2

port 3 port 1.0.3

port 4 port 1.0.4

port 5 port 1.0.5

port 5 port 1.0.6

port 7 port 1.0.7

port 8 port 1.0.8

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 247 248

Sin comentarios

Allied Telesis Switch AT-9000/28 Manual de usuario Pagina 58