Allied Telesis Switch AT-9000/28 Manual de usuario Pagina 21

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 248
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 20
AlliedWare Plus Version 2.1.2 Management Software Web Browser User’s Guide
21
5. Display the IP address assigned to VLAN 1 by entering the following
commands:
awplus(config-if)# exit
awplus(config)# exit
awplus# show ip interface
For a display of this command, see Figure 2.
Figure 2. Displaying the IP address
6. Enable the web browser on the switch by entering the following
commands:
awplus# configure terminal
awplus(config)# http server
7. Save your changes on the switch by copying the running configuration
file to the start-up configuration file. Enter the following command:
awplus# copy running-config startup-config
8. Open a web browser, such as Microsoft Explorer, and enter one of the
following:
To start an HTTP session, enter: http:// followed by the IP address
of the switch.
To start an HTTPS session, enter: https:// followed by the IP
address of the switch.
awplus# show ip interface
Interface IP-Address Status Protocol
vlan1-0 167.142.10.5/16 admin up running
Vista de pagina 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 247 248

Comentarios a estos manuales

Sin comentarios