Allied-telesis SwitchBlade x8112 Manual de usuario Pagina 166

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 240
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 165
Chapter 7: Powering On the Chassis
166
4. Using a #1 Phillips-head screwdriver, remove the two screws that
secure the plastic cover over the positive and negative terminals and
remove the plastic cover from the power supply, as shown in
Figure 120. You may need to lift the locking handle slightly to access
the bottom screw.
Figure 120. Removing the Plastic Cover
Note
The plastic cover is not used with the right angle terminals.
5. Use a #3 Phillips-head screwdriver to remove the two screws from the
positive and negative terminals, as shown in Figure 121 on page 167.
Vista de pagina 165
1 2 ... 161 162 163 164 165 166 167 168 169 170 171 ... 239 240

Comentarios a estos manuales

Sin comentarios