Allied-telesis SwitchBlade x3112 Manual de usuario Pagina 123

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 222
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 122
SwitchBlade x3112 Installation Guide
123
Figure 80. Tightening the Thumb Screws on an Ethernet Line Card
6. Tighten the two screws with a # 2 Phillips-head screwdriver to secure
the line card to the chassis.
Allied Telesis recommends tightening the screws to 5 inch-lbs.
7. Repeat this procedure to install the remaining Ethernet line cards.
8. After installing the line cards. go to “Installing the Blank Slot Covers” on
page 124.
Vista de pagina 122
1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 221 222

Comentarios a estos manuales

Sin comentarios