Allied-telesis AT-S95 CLI Manual de usuario Pagina 211

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 392
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 210
QoS Commands
Page 211
Parameters
rate — Maximum kilobits per second of ingress traffic on a port. (Range: 3500 - 1000000).
Default Configuration
1000 Kbits/Sec
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
The command can be enabled on a specific port only if port storm-control Broadcast enable interface
configuration command is not enabled on that port.
Example
The following example limits the rate of the incoming traffic to 62.
traffic-shape
The traffic-shape Interface Configuration mode command sets a shaper on an egress interface. Use the no form
of this command to disable the shaper.
Syntax
traffic-shape committed-rate
no traffic-shape
Parameters
committed-rate — The average traffic rate (CIR) in bits per second (bps). (Range: 64 -10000.)
Default Configuration
No shape is defined.
Command Mode
Interface Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures a shaper on port e1.
Console(config-if)#
rate-limit
62
console(config-if)#
traffic-shape
50000
Vista de pagina 210
1 2 ... 206 207 208 209 210 211 212 213 214 215 216 ... 391 392

Comentarios a estos manuales

Sin comentarios