Allied-telesis AT-S95 CLI Manual de usuario Pagina 141

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 392
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 140
IP Addressing Commands
Page 141
no ip domain-lookup
Parameters
This command has no arguments or keywords.
Default Configuration
The default configuration is set to enabled.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enables IP Domain Naming System (DNS)-based host name-to-address translation.
ip host
The ip host Global Configuration mode command defines static host name-to-address mapping in the host cache.
Use the no form of this command to remove the name-to-address mapping.
Syntax
ip host name address
no ip host name
Parameters
name — Specifies the name of the host. (Range: 1 - 158 characters)
address — Specifies the associated IP address.
Default Configuration
No host is defined.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example defines a static host name-to-address mapping in the host cache.
console(config)# ip domain-lookup
console(config)#
ip host
accounting.website.com 176.10.23.1
Vista de pagina 140
1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 391 392

Comentarios a estos manuales

Sin comentarios