Allied-telesis AT-S25 Manual de usuario Pagina 26

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 277
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 25
26
Chapter 1
Overview
The AT-S25 management software is intended for the AT-8316F and AT-
8324 Fast Ethernet Switches. The software is used to monitor and adjust
a switchs operating parameters. Functions that you could perform with
the software include:
Enable and disable ports
Configure port parameters, such as port speed and duplex mode
Create virtual LANs (VLANs)
Create port trunks and port mirrors
Assign an Internet Protocol (IP) address and subnet mask
Activate and configure Spanning Tree Protocol (STP) and
Rapid Spanning Tree Protocol (RSTP)
Configure port security
Configure IGMP Snooping
Configure and View MAC Addresses
Configure Class of Service
File Uploads and Downloads
The AT-S25 management software comes pre-installed on the switch
with default settings for all operating parameters. If the default settings
are adequate for your network, you could use the switch as an
unmanaged switch simply by connecting the unit to your network, as
explained in the hardware installation guide, and powering ON the
device.
Vista de pagina 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 276 277

Comentarios a estos manuales

Sin comentarios