Allied-telesis AT-S25 Manual de usuario Pagina 214

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 277
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 213
Section III: Web Browser Management
214
The columns in the window are described below:
PARAMETER DESCRIPTION
PortName/
UplinkType
PortName is the name of the port, and UplinkType is
the type of the applique in the uplink slot (AT-A14,
AT-A15, AT-A17, AT-A18, or AT-A19).
NOTE: The UplinkType only applies to the uplink
ports.
State
The current state of the port.
Possible settings for this parameter are:
Enable (default)
Disable
Nego
The status of Auto-Negotiation on the port.
Possible settings for this parameter are:
Auto - Indicates that the port is using Auto-
Negotiation to set operating speed and duplex
mode.
Manual - Indicates that the operating speed and
duplex mode have been set manually.
Link
The status of the link between the port and the end
node connected to the port.
Possible settings for this parameter are:
Up - indicates that a valid link exists between the
port and the end node.
Down - indicates that the port and the end node
have not established a valid link.
Speed
The operating speed of the port.
Possible settings for this parameter are:
10 Mbps = 10 MB
100 Mbps = 100 MB
1000 Mbps = 1 GB (AT-8324 uplink only)
Duplex
The duplex mode of the port.
Possible settings for this parameter are:
Half-duplex
Full-duplex
PVID
The port VLAN identifier currently assigned to the
port.
Vista de pagina 213
1 2 ... 209 210 211 212 213 214 215 216 217 218 219 ... 276 277

Comentarios a estos manuales

Sin comentarios