Allied-telesis AT-S25 Manual de usuario Pagina 137

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 277
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 136
AT-S25 Management Software Users Guide
137
Modifying a VLAN
Note
You need to know the VID of the VLAN you wish to modify in order
to perform this procedure. To view the VLAN VIDs, refer to the
procedure Displaying VLAN Information on page 139.
To modify a VLAN, perform the following procedure:
1. From the Main Menu, type 2 to select VLAN Menu.
2. From the VLAN Menu, type 1 to select VLAN Definition.
3. From the VLAN Definition menu, type 2 to select Modify VLAN.
The Modify VLAN window in Figure 49 is displayed.
Figure 47 Modifying VLAN Menu
4. Type M if you wish to select a module other than the one currently
displayed.
The prompt message is displayed:
Select Module ID: [1 to 8] ->
5. Enter the ID of the module you wish to select, and press the Enter key.
6. Type 1 to select VLAN ID (VID).
The following prompt is displayed:
Enter new value -> [1 to 2048] ->
Vista de pagina 136
1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 276 277

Comentarios a estos manuales

Sin comentarios