Allied-telesis AT-S25 Manual de usuario Pagina 259

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 277
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 258
AT-S25 Management Software Users Guide
259
Adding Static and Multicast MAC Addresses
This section contains the procedure for assigning static address to the
ports on the switch. You could assign up to 255 static MAC addresses per
port.
To add a static address to the MAC Menu, perform the following
procedure:
1. From the Home page, select Configuration.
2. From the Configuration page, select Layer 2.
3. From the Layer 2 page, select the MAC Address tab.
The MAC Address window in Figure 104 on page 257 is displayed.
4. Click Add.
The Add Static MAC Address window in Figure 106 is displayed.
Figure 106 Add Static MAC Address window
5. In the MAC Address section of the window, enter the new static MAC
address.
6. Select a port and a VLAN ID.
7. Click Apply.
8. Repeat this procedure to add other static addresses to the switch.
Vista de pagina 258
1 2 ... 254 255 256 257 258 259 260 261 262 263 264 ... 276 277

Comentarios a estos manuales

Sin comentarios