Allied-telesis AlliedWare Plus Operating System Version 5.4.4C (x Manual de usuario descargar pdf (Pagina 55)

Getting Started

Software Reference for x310 Series Switches

C613-50046-01 REV A AlliedWare Plus

Operating System - Version 5.4.4C 1.31

How to Upgrade the Firmware

New releases of the AlliedWare Plus

OS become available regularly. Contact your

customer support representative for more information.

Step 1: Put the new release onto your TFTP server or your USB drive.

Step 2: If necessary, create space in the switch’s Flash memory for the

new release

Note that you cannot delete the current release file.

To see how much space is free, use the command:

Step 3: Copy the new release from your TFTP server or your USB drive

onto the switch

Follow the relevant instructions in “Copying with Trivial File Transfer Protocol (TFTP)”

on page 6.16, or “Copying to and from NVS or USB storage device” on page 6.15, as

appropriate.

Step 4: Set the switch to boot from the new release

Enter Global Configuration mode and enter the command:

You can set a backup release file to load if the main release file cannot be loaded. Enter the

command:

Step 5: Check the boot settings

Enter Privileged Exec mode and enter the command:

Step 6: Reboot

Enter Privileged Exec mode and enter the command:

awplus#

show file systems

awplus(config)#

boot system <filepath-filename>

awplus(config)#

boot system backup <filepath-filename>

awplus#

show boot

awplus#

reboot

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 221 222

Sin comentarios

Allied-telesis AlliedWare Plus Operating System Version 5.4.4C (x Manual de usuario Pagina 55