Allied-telesis AT-S83 Manual de usuario descargar pdf (Pagina 164)

Chapter 8: Simple Network Management Protocol (SNMP) Commands

164

write Specifies the view that the user is allowed to read and

write.

VIEWNAME Indicates a name of a view defined with

the SNMP-SERVER VIEW command.

Description

Use the SNMP-SERVER GROUP command to define the access rights

for an SNMP group that you created with the SNMP-SERVER USER

command. The SNMP-SERVER GROUP command assigns a security

model and a security level to a group.

Use the no form of this command to remove an SNMP group.

Command Mode

Configuration Terminal mode

Example

The following command creates an SNMPv1 group named “marcom” with

write access to a view called “internet”:

switch#snmp-server group marcom v1 write 1.3.6.1

The following command creates an SNMPv1 group named “group1” with

access to a view called “nview” with notify permission:

switch#snmp-server group group1 v1 notify nview

The following command creates an SNMPv2c group named “group2” with

access to a view called “wview” with write permission and a view called

“nview” with notify permission:

switch#snmp-server group group2 v2c write wview notify

nview

The following command creates an SNMPv3 group named “group3” with

MD5 and SHA packet authentication enabled. This group also has access

to view called “wview” with write permission and a view called “nview” with

notify permission:

switch#snmp-server group group3 v3 auth read rview

write wview notify nview

Related Commands

“SHOW RUNNING-CONFIG” on page 64

“SNMP-SERVER VIEW” on page 170

1 2 ... 159 160 161 162 163 164 165 166 167 168 169 ... 381 382

Sin comentarios

Allied-telesis AT-S83 Manual de usuario Pagina 164