Allied Telesis AR450S Manual de usuario descargar pdf (Pagina 42)

3-42 SHOW SWITCH PORT COUNTER AR400 Series Router Software Reference

Software Release 2.6.6

C613-03079-00 REV A

SHOW SWITCH PORT COUNTER

Syntax SHOW SWITCH PORT[={port-list|ALL}] COUNTER

where:

■ port-list is a port number, a range of port numbers (specified as n-m), or a

comma separated list of port numbers and/or ranges. Port numbers start

at 1 and end at m, where m is the highest numbered Ethernet port.

Description This command displays counters for the specified switch ports or all switch

ports (see Figure 3-12 on page 3-42 and Table 3-18 on page 3-42).

Figure 3-12: Example output from the SHOW SWITCH PORT COUNTER command.

Port 1. Statistics counters:

Receive/Transmit Packet by size (octets) counters:

Receive Transmit

64 2 64 0

65 - 127 0 65 - 127 0

128 - 255 0 128 - 255 0

256 - 511 0 256 - 511 0

512 - 1023 0 512 - 1023 0

1024 - 1522 0 1024 - 1522 0

General Counters:

Receive Transmit

Octets 128 Octets 0

Pkts 2 Pkts 0

UnicastPkts 0 UnicastPkts 0

BroadcastPkts 0 BroadcastPkts 0

PauseFramess 0 PauseFrames 0

MulticastPkts 0 MulticastPkts 0

Discards 0 Discards 0

AlignmentErrors 0

BadOctets 0

UndersizePkts 0

Fragments 0

Jabber 0

OversizePkts 0

Filtered 0

CollisionFrames 0

LateCollisions 0

ExcessiveCollisions 0

MultCollsnFrames 0

SingleCollisionFrames 0

Deferred 0

Table 3-18: Parameters in output from SHOW SWITCH PORT COUNTER

command

Parameter Description

Receive

Counters for traffic received.

64 Total frames received with a length of exactly 64 octets, including

those with errors.

65 – 127 Total frames received with a length of between 65 and 127 octets

inclusive, including those with errors.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 48

Comentarios a estos manuales

Sin comentarios

Allied Telesis AR450S Manual de usuario Pagina 42

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Allied Telesis AR450S