Allied Telesis AR450S Manual de usuario descargar pdf (Pagina 33)

Switching on the AR440S, AR441S and AR450S SET SWITCH QOS 3-33

Software Release 2.6.6

C613-03079-00 REV A

port(s) autonegotiate the highest mutually possible line speed and duplex

mode with the link partner. If one of 10MFAUTO, 10MHAUTO, 100MFAUTO,

or 100MHAUTO is specified, the port autonegotiates with the link partner but

only accepts operation at the specified speed and duplex mode. If one of

10MHALF, 10MFULL, 100MHALF, or 100MFULL is specified, then

autonegotiation is disabled and the interface is forced to operate at the

specified speed and duplex mode, regardless of whether the link partner is

capable of working at that speed. The default is AUTONEGOTIATE.

Example To set the speed of port 2 to 10Mbps, half duplex, use the command:

SET SWITCH PORT=2 SPEED=10MHALF

Related Commands DISABLE SWITCH PORT

ENABLE SWITCH PORT

SHOW SWITCH PORT

SET SWITCH QOS

Syntax SET SWITCH QOS=P0,P1,P2,P3,P4,P5,P6,P7

where P0-P7 are each numbers from 0-n, where n+1 is the number of Quality of

Service egress queues supported

Description This command maps user priority levels to Quality of Service egress queues.

The QOS parameter specifies a comma separated list of eight values, all of

which must be present. The first value, P0, represents the QOS queue for

priority level 0. The last value, P7, represents the QOS queue for priority level

7. Similarly, values P1 to P6 represent the QOS queue for the corresponding

priority level.

The router has four QOS egress queues. The default QOS values are

1,0,0,1,2,2,3,3 as shown in Table 3-11 on page 3-34.

Packets that originate on the router, or are routed by the router’s software, have

been assigned a Quality of Service priority of 7. To ensure that these packets are

Table 3-10: Switch port speed values.

Value Meaning

10MHALF 10 Mbps, half duplex, fixed, auto MDI/MDI-X

10MFULL 10 Mbps, full duplex, fixed, auto MDI/MDI-X

10MHAUTO 10 Mbps, half duplex, autonegotiate, auto MDI/MDI-X

10MFAUTO 10 Mbps, full duplex, autonegotiate, auto MDI/MDI-X

100MHALF 100 Mbps, half duplex, fixed, auto MDI/MDI-X

100MFULL 100 Mbps, full duplex, fixed, auto MDI/MDI-X

100MHAUTO 100 Mbps, half duplex, autonegotiate, auto MDI/MDI-X

100MFAUTO 100 Mbps, full duplex, autonegotiate, auto MDI/MDI-X

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 47 48

Sin comentarios

Allied Telesis AR450S Manual de usuario Pagina 33