Allied Telesis AT-2450 Series Guía de instalación descargar pdf (Pagina 21)

Installation with Windows NT

12. This completes the card installation. Once the driver is

installed, complete the installation of the network software

and then reboot the computer to load the driver files.

Removing an Outdated Driver from the Windows NT

Network Control Panel

If any drivers need to be removed from your existing

installation, remove them first, shutdown the NT Operating

system and reboot.

1. NT 3.5x: From the Main program group, choose “Control

Panel”. Then choose “Network”.

NT 4.0: Double-click the Network icon in the Control

Panel.

2. NT 3.5x: From the “Network Settings” dialog box, select

the adapter to remove. Then choose “Remove”.

NT 4.0: Select the Adapters tab. Select the adapter to

remove. Then choose “Remove”.

3. From the “Network Settings” dialog box, verify that the

selected adapter has been removed from the “Installed

Adapter Cards” list. Then choose “OK”.

4. From the “Network Settings Change” dialog box, choose

“Restart Now”.

5. After the Windows NT operating system shuts down and

the DOS BIOS message appears, reboot your computer by

turning the power switch off and on. Do not use

the or - - method.

6. Log on to Windows NT.

7. Follow the instructions in “Installing Network Software

and Drivers” on page 13 to install your AT-2450 Ethernet

Adapter.

RESET CONTROL ALT

DELETE

2450T IG.bk Page 15 Tuesday, December 29, 1998 11:58 AM

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 63 64

Sin comentarios

Allied Telesis AT-2450 Series Guía de instalación Pagina 21