Allied Telesis AT-2450 Series Guía de instalación descargar pdf (Pagina 20)

AT-2450 PCI Ethernet Adapter Card

4. NT 3.5x: From the Network Adapter Card drop-down list

in the Add Network Adapter dialog box, choose

“<OTHER> Requires Disk from Manufacturer”. Then click

Continue.

NT 4.0: From the Select Network Adapter pop-up

window, do not select from the Network Adapter list;

choose the Have Disk button.

5. Insert the CardAssistant diskette into your floppy disk

drive and click OK.

NOTE

For 32-bit ODI support with NT, use the path

<drive>:\NWSERVER, where <drive> is the letter of the floppy

drive.

6. Verify that “ATI AT2450 Ethernet Adapter” appears in

the Choose OEM Option dialog box. Then click OK.

7. In the Network Settings dialog box, verify that “ATI

AT2450 Ethernet Adapter” appears in the Installed

Adapter Cards list. Then click OK.

8. The MAC (Media Access Control) Address dialog box

appears. If this is the only AT-2450 to be installed in the

computer, leave the address field blank and click OK for

Auto Scan. Otherwise enter the card's MAC address, found

on the Station Address label inside the manual cover, and

click OK.

9. Windows NT prompts you to configure the protocols you

will be using for network communications.

10. From the Network Settings Change dialog box, click

Restart Now.

11. After the Windows NT operating system shuts down,

restart your computer by turning the power switch off and

on. Do not use the or - -

method.

RESET CONTROL

ALT

DELETE

2450T IG.bk Page 14 Tuesday, December 29, 1998 11:58 AM

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 63 64

Sin comentarios

Allied Telesis AT-2450 Series Guía de instalación Pagina 20