Allied Telesis AT-FS705LE Guía de instalación descargar pdf (Pagina 18)

Port 5 and the Uplink Port

Port 5 and the Uplink port allow you to connect

an additional workstation to the switch or

interconnect the switch with another switch or

hub, without the use of a crossover cable. If you

need to connect an additional workstation to

the switch, use Port 5, which is configured as

MDI-X. If you need to connect the switch to

another Ethernet switch, use the Uplink port,

which is configured as MDI.

Both Port 5 and the Uplink port offer 10 Mbps

or 100 Mbps performance and auto-negotiation

operation for both speed and duplex mode. Both

ports feature a RJ-45 connector and have a

maximum operating distance of 100 meters

(328 feet) using Category 5 cable.

Note

You can use either Port 5 or the Uplink

port, but you cannot use both

simultaneously.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 45 46

Sin comentarios

Allied Telesis AT-FS705LE Guía de instalación Pagina 18