Allied-telesis x900 Series Switch Manual de usuario descargar pdf (Pagina 6)

x900 Series Switch

Installing the Switch

You can install the switch on a level surface, such as a desktop or bench, or in a

standard 19-inch rack. The switch is heavier at the rear than at the front.

Therefore use the brackets supplied with the switch when rack-mounting

because they are designed to fully support the weight.

Before you begin

■ Read the safety information.

For your well-being and that of the equipment, read the safety information in

this document. You can also download this document from the

Documentation and Tools CD-ROM or from www.alliedtelesis.com/support/

software.

■ Verify the package contents if you have not already done so.

See “Package Contents” on page 4. If any items are damaged or missing,

contact your authorised distributor or reseller.

■ Gather necessary tools and equipment:

• Phillips #2 screwdriver to loosen the blanking plate, if any

• 4 sets of rack-mount screws and nuts, and a suitable screwdriver

To install a DC version of the PSU, you need an appropriate DC power

source, DC supply cable, ring connectors, and a crimp tool.

■ Prepare the cabinet in a suitable location

Follow guidelines described in “Selecting a Site” on page 5 to choose an

appropriate location and modify the rack as necessary.

■ Because the switch is deep, we recommend two people mount the switch in

the rack and tighten the screws.

■ If you have an optional expansion module for the AT-9924Ts or x900-24X

switches, install it in the switch first.

Refer to the Expansion Module Installation Guide for the x900-24X Series Switch

for details.

Warning Both AC and DC versions of this equipment must be earthed through

the power cables provided.

1 2 3 4 5 6 7 8 9 10 11 ... 38 39

Sin comentarios

Allied-telesis x900 Series Switch Manual de usuario Pagina 6