Allied-telesis x900 Series Switch Manual de usuario descargar pdf (Pagina 5)

Installation and Safety Guide

Selecting a Site

Before you install the switch, review the following considerations about its

location.

■ AT-8948, x900-48FE, and AT-9900 switches require an ambient temperature

from 0ºC to 50ºC (32ºF to 122ºF).

■ AT-9924Ts, x900-24X switches require an ambient temperature from 0ºC to

40ºC (32ºF to 104ºF).

■ There should be adequate airflow around the switch and its vents.

■ The site should be dust-free and without moisture.

■ Humidity can be from 5% to 80% non-condensing.

■ You need a reliable and earthed (grounded) power supply source, preferably

dedicated and filtered.

■ Cabling must not be exposed to sources of electrical noise, such as radio

transmitters, broadband amplifiers, power lines, electric motors, and

fluorescent fixtures.

■ Related network devices can be connected to the switch but cannot exceed

maximum cable lengths specified in the Hardware Reference.

■ You may need to remove doors to accommodate cords and cables.

■ Ensure easy access to the switch’s power and cable connections.

1 2 3 4 5 6 7 8 9 10 ... 38 39

Sin comentarios

Allied-telesis x900 Series Switch Manual de usuario Pagina 5