Allied-telesis x610 Series Layer 3 Manual de usuario Pagina 37

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 120
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 36
x610 Series Layer 3 Gigabit Ethernet Switches Installation Guide
37
Table 6 describes the LEDs for the Base-T ports.
Table 6. Switch Base-T LED Descriptions
LED Function State Description
L/A Link Status
and Activity
Off No link has been established between
th
e port and the end node.
Solid
Green
The port
has established a link at
1
000 Mbps.
Flashing
Green
Packe
ts are being received or
tr
ansmitted at 1000 Mbps.
Solid
Amber
T
he port has established a link at 10
or 100 Mbps.
Flashing
Amber
Packe
ts are being received or
tr
ansmitted at 10 or 100 Mbps
.
D/C
Duplex
Mode and
Collisions
Solid
Green
The port
is operating in full-duplex
mode.
Solid
Amber
The port is operating in half-duplex
mode
(only applies when operating at
1
0 or 100 Mbps).
Flashing
Amber
Collisions are occurring on the port
(only applies when operating at 10 or
1
00 Mbps, half-duplex mode).
PoE
Power over
Etherne
t
Status
Off T
here is no powered device detected.
Solid
Green
The end node is a powered device
and the port is providing power to it.
Solid
Amber
The port
is experiencing a problem
p
roviding PoE to the end no
de.
Flashing
Amber
The port is connected to a powered
d
evice but providing
power to it would
exceed the maximum PoE power
budget of the switch.
Vista de pagina 36
1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 119 120

Comentarios a estos manuales

Sin comentarios