Allied-telesis x310 Series Manual de usuario descargar pdf (Pagina 86)

Chapter 6: Cabling the Stacking Ports

5. Remove the dust cover from the S2 slot in the next switch in the stack

as shown in Figure 40.

Note

The cable must crossover to different slots on the switches. The

stack will not work if you connect two S1 or S2 slots together.

Figure 40. Removing the Dust Plug from the S2 Slot

6. Remove the dust cover from the connector on the other end of the

transceiver.

7. Position the transceiver with the release tab on the bottom and slide it

into the slot until it clicks into place, as shown in Figure 41 on page 87.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 119 120

Sin comentarios

Allied-telesis x310 Series Manual de usuario Pagina 86