Allied-telesis x310 Series Manual de usuario descargar pdf (Pagina 64)

Chapter 3: Beginning the Installation

Planning a Stack

Here are the guidelines to planning a stack:

 A stack can have up to four x310 Series switches.

 A stack can have different models of x310 Series switches.

 Any x310 Series switch model can be the master switch of a stack.

 Switches connected with AT-StackXS/1.0 stacking cables should

be installed in a standard 19-inch equipment rack and not more

than one meter apart, the length of the stacking cable. The end

switches cannot be more than one meter apart if you want to

create the ring topology, shown in Figure 18 on page 52 and

Figure 19 on page 53.

 The wiring topology of the stack may be either linear or ring. Both

topologies offer the same in terms of speed, but the ring topology

adds wiring redundancy.

 The x310 Series stack may not contain other stacking switches,

such as x600 and x610 Series switches.

 The x310 Series switches do not need any additional software for

stacking. However, they do need stacking transceivers.

 All the switches must have the same licenses of optional features.

If you install an optional feature on one switch, you must install it

on all switches before assembling the stack.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 119 120

Sin comentarios

Allied-telesis x310 Series Manual de usuario Pagina 64