Allied-telesis AT-PBC18 Manual de usuario descargar pdf (Pagina 93)

Chapter 6

Installing an Optional Management

Module

This chapter describes the features and functions of the PowerBlade

Optional Management Module. This chapter also provides the

procedure for:

❑ Installing an Optional Management Module on page 96

Overview

The AT-PBM02 is an optional management module for the PowerBlade

PBC18. When installed, the management module allows you to monitor

the operating status of the media converters and switches installed the

chassis. The management module is not required for normal network

operations, but it is necessary if you want to locally or remotely monitor

and configure the modules installed in the chassis and the ports on the

modules.

The management module features a RS-232 terminal port with a DB9

connector. The terminal port is used for local management. The

AT-PBM02 also features a 10Base-T twisted pair port with an RJ-45

connector. The twisted pair port is used for remote management. The

RJ-45 has a maximum operating distance of 100 meters (328 feet) and

supports 10 Mbps half-duplex operation.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 119 120

Sin comentarios

Allied-telesis AT-PBC18 Manual de usuario Pagina 93