Allied-telesis AT-PBC18 Manual de usuario descargar pdf (Pagina 30)

Installing the Chassis on a Desktop or in a Rack

Note

The chassis may be heavy and awkward to lift. It is recommended

that you get assistance with the next step.

3. Attach the chassis to the rack with 4 screws (not provided) for each

side. Refer to Figure 9.

Note

The brackets are designed to be installed in the center of a 3U high

opening on a standard rack.

Figure 9 Installing the Chassis in a Rack

Caution

Power cord is used as a disconnection device. To de-energize

equipment, disconnect the power cord. ! 10

4. Apply power to the chassis by connecting the AC power cord or DC

wires. Refer to Chapter 3, Installing a Power Supply Module on page

33 for instructions.

Note

If you purchased an optional management module, install the

module before applying power to the chassis. Refer to Installing an

Optional Management Module on page 93 for installation

instructions.

19-inch Version

23- and 25-inch Version

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 119 120

Sin comentarios

Allied-telesis AT-PBC18 Manual de usuario Pagina 30