Allied-telesis AT-PBC18 Manual de usuario Pagina 39

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 120
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 38
PowerBlade PBC18 Installation Guide
39
Note
This system will work with a positive grounded or negative
grounded DC system. ! 20
h. Connect the three DC wires to a DC power source.
7. Check that the PWR1 LED on the front of the chassis is green. If the
LED is OFF, refer to Troubleshooting on page 99 for assistance.
The PowerBlade PBC18 is now ready for use. Proceed to Installing a
Media Converter Module on page 43 or Installing a Switch Module on
page 77 for further instructions.
Vista de pagina 38
1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 119 120

Comentarios a estos manuales

Sin comentarios