Allied-telesis AT-FS970M Series Manual de usuario Pagina 191
- Pagina / 193
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
AT-FS970M Switch Command Line User’s Guide
191
To remove threshold limits from the ports, use the NO STORM-CONTROL
command, also in the Port Interface mode. This example removes the
threshold limit for broadcast packets on port 12:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.12
awplus(config-if)# no storm-control broadcast
This example disables unknown unicast rate limiting on port 5, 6, and 15:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.5,port1.0.6,port1.0.15
awplus(config-if)# no storm-control dlf
This example removes the threshold limit for multicast packets on port 23:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.23
awplus(config-if)# no storm-control multicast
For reference information, refer to “STORM-CONTROL” on page 249 and
“NO STORM-CONTROL” on page 221.
- AT-FS970M Series 1
- Copyright 2
- Contents 10
- Document Conventions 46
- Contacting Allied Telesis 48
- Getting Started 49
- AlliedWare Plus Command Line 51
- Interface 51
- Management Sessions 52
- Remote Telnet Management 53
- Web Browser Windows 53
- Management Interfaces 55
- Local Manager Account 56
- AlliedWare Plus Command Modes 57
- Moving Down the Hierarchy 60
- Moving Up the Hierarchy 65
- DISABLE command 66
- Port Numbers in Commands 67
- Command Format 69
- Startup Messages 70
- Starting a Management Session 73
- What to Configure First 78
- Changing the 79
- Login Password 79
- Assigning a Name 79
- Adding a 80
- Management IP 80
- Saving Your 82
- Ending a Management Session 83
- Basic Command Line Management 85
- Clearing the Screen 86
- Displaying the On-line Help 87
- ? (Question Mark Key) 93
- CLEAR SCREEN 95
- CONFIGURE TERMINAL 96
- Examples 100
- Parameters 101
- Description 101
- Chapter 5 109
- Controlling Eco-Mode LED 112
- Temperature and Fan Control 113
- ECOFRIENDLY LED 114
- NO ECOFRIENDLY LED 115
- SHOW ECOFRIENDLY 116
- SHOW SYSTEM ENVIRONMENT 117
- Parameter Description 118
- Basic Operations 119
- Basic Switch Management 121
- Adding a Name to the Switch 122
- Contact: JordanB 123
- Displaying Parameter Settings 124
- Pinging Network Devices 126
- Resetting the Switch 127
- filename2 129
- “SHOW BAUD-RATE” on page 164 131
- Configuring the Banners 135
- Chapter 8 139
- BANNER EXEC 141
- BANNER LOGIN 143
- BANNER MOTD 145
- BAUD-RATE SET 147
- CLOCK SET 148
- ERASE STARTUP-CONFIG 149
- EXEC-TIMEOUT 150
- HOSTNAME 153
- LINE CONSOLE 154
- LINE VTY 155
- NO HOSTNAME 156
- PING IPv6 159
- SERVICE MAXMANAGER 162
- SHOW BANNER LOGIN 163
- SHOW BAUD-RATE 164
- SHOW CLOCK 165
- SHOW RUNNING-CONFIG 166
- SHOW SWITCH 167
- SHOW SYSTEM 169
- SHOW SYSTEM SERIALNUMBER 170
- SHOW USERS 171
- SHOW VERSION 173
- SNMP-SERVER CONTACT 174
- SNMP-SERVER LOCATION 175
- SYSTEM TERRITORY 176
- Port Parameters 179
- Adding Descriptions 180
- Chapter 9: Port Parameters 182
- Enabling or Disabling Ports 184
- Resetting Ports 189
- Displaying Port 196
- Displaying SFP Information 198
- Port Parameter Commands 199
- Command Mode Description 201
- BACKPRESSURE 202
- CLEAR PORT COUNTER 205
- DESCRIPTION 206
- EGRESS-RATE-LIMIT 210
- FCTRLLIMIT 211
- FLOWCONTROL 212
- HOLBPLIMIT 215
- NO EGRESS-RATE-LIMIT 217
- NO FLOWCONTROL 218
- NO SHUTDOWN 219
- NO STORM-CONTROL 221
- POLARITY 222
- RENEGOTIATE 225
- SHOW FLOWCONTROL INTERFACE 227
- SHOW INTERFACE 229
- Interface Port number 230
- SHOW INTERFACE BRIEF 233
- SHOW INTERFACE STATUS 235
- SHOW RUNNING-CONFIG INTERFACE 240
- SHOW STORM-CONTROL 241
- SHOW SYSTEM PLUGGABLE 243
- SHOW SYSTEM PLUGGABLE DETAIL 244
- SHUTDOWN 245
- STORM-CONTROL 249
- Power Over Ethernet 251
- Prioritization 253
- Enabling and Disabling PoE 254
- Prioritizing Ports 257
- Managing Legacy PDs 259
- Monitoring Power Consumption 260
- Displaying PoE Information 261
- Power Over Ethernet Commands 263
- NO POWER-INLINE ALLOW-LEGACY 266
- NO POWER-INLINE DESCRIPTION 267
- NO POWER-INLINE ENABLE 268
- NO POWER-INLINE MAX 269
- NO POWER-INLINE PRIORITY 270
- NO SERVICE POWER-INLINE 272
- POWER-INLINE ALLOW-LEGACY 274
- POWER-INLINE DESCRIPTION 275
- POWER-INLINE ENABLE 276
- POWER-INLINE MAX 277
- POWER-INLINE PRIORITY 278
- POWER-INLINE USAGE-THRESHOLD 280
- SERVICE POWER-INLINE 281
- SHOW POWER-INLINE 282
- SHOW POWER-INLINE INTERFACE 287
- Chapter 13 293
- Adding an IPv4 297
- Management 297
- Default Gateway 299
- Deleting an IPv4 300
- Address and 300
- Displaying an 301
- Adding an IPv6 302
- Deleting an IPv6 304
- CLEAR IPV6 NEIGHBORS 309
- 143.87.132.45: 315
- IPV6 ADDRESS 316
- IPV6 ROUTE 318
- 45ab:672:934c::78:17cb: 319
- NO IPV6 ADDRESS 323
- NO IPV6 ROUTE 324
- SHOW IPV6 INTERFACE 329
- SHOW IPV6 ROUTE 330
- Chapter 15 331
- SNTP Server 333
- Disabling the SNTP Client 336
- Displaying the SNTP Client 337
- Displaying the Date and Time 338
- SNTP Client Commands 339
- CLOCK SUMMER-TIME 340
- CLOCK TIMEZONE 341
- NO CLOCK SUMMER-TIME 342
- NO NTP PEER 343
- NTP PEER 344
- PURGE NTP 345
- SHOW NTP ASSOCIATIONS 347
- SHOW NTP STATUS 349
- Domain Name System (DNS) 351
- IP NAME-SERVER 360
- IP DOMAIN-NAME 362
- IP DOMAIN-LIST 363
- IP DOMAIN-LOOKUP 365
- SHOW IP NAME-SERVER 366
- SHOW IP DOMAIN-NAME 367
- SHOW HOSTS 368
- Adding Static MAC Addresses 372
- Deleting MAC Addresses 374
- Setting the Aging Timer 376
- Chapter 19: MAC Address Table 378
- MAC Address Table Commands 379
- CLEAR MAC ADDRESS-TABLE 380
- MAC ADDRESS-TABLE AGEING-TIME 382
- MAC ADDRESS-TABLE STATIC 384
- NO MAC ADDRESS-TABLE STATIC 386
- SHOW MAC ADDRESS-TABLE 388
- Chapter 21: Enhanced Stacking 394
- Save the configuration 397
- Configuring a Member Switch 398
- Member Switches 404
- Disabling Enhanced Stacking 413
- Enhanced Stacking Commands 415
- ESTACK COMMAND-SWITCH 417
- ESTACK RUN 418
- NO ESTACK COMMAND-SWITCH 419
- NO ESTACK RUN 420
- RCOMMAND 421
- REBOOT ESTACK MEMBER 422
- SHOW ESTACK 424
- SHOW ESTACK COMMAND-SWITCH 426
- SHOW ESTACK REMOTELIST 427
- UPLOAD CONFIG REMOTELIST 429
- UPLOAD IMAGE REMOTELIST 430
- Link-flap Protection 433
- Configuring the Feature 436
- Link-flap Protection Commands 437
- LINK-FLAP DURATION 438
- LINK-FLAP PROTECTION 439
- LINK-FLAP RATE 440
- NO LINK-FLAP PROTECTION 441
- SHOW LINK-FLAP 442
- Port Mirror 443
- Chapter 25: Port Mirror 446
- Displaying the Port Mirror 449
- Port Mirror Commands 451
- MIRROR INTERFACE 453
- NO MIRROR INTERFACE 455
- SHOW MIRROR 456
- DHCP Relay Overview 459
- Agent Option 82 461
- Client Requests 462
- Message Length 463
- Adding the IP 464
- Addresses of the 464
- DHCP Servers 464
- Adding DHCP 465
- Relay to the 465
- Option 82 467
- DHCP Relay Commands 471
- IP DHCP-RELAY 473
- IP DHCP-RELAY AGENT-OPTION 474
- IP DHCP-RELAY MAXHOPS 479
- IP DHCP-RELAY SERVER-ADDRESS 480
- NO IP DHCP-RELAY 481
- NO IP DHCP-RELAY AGENT-OPTION 482
- 214.154.35.78 484
- NO SERVICE DHCP-RELAY 485
- SERVICE DHCP-RELAY 486
- SHOW IP DHCP-RELAY 487
- Group Link Control 489
- Configuration Examples 499
- Group Link Control Commands 503
- GROUP-LINK-CONTROL 504
- GROUP-LINK-CONTROL DOWNSTREAM 505
- GROUP-LINK-CONTROL UPSTREAM 507
- NO GROUP-LINK-CONTROL 508
- SHOW GROUP-LINK-CONTROL 511
- Multicast Commands 513
- File System 519
- destinationfile 523
- Chapter 32: File System 526
- File System Commands 529
- DELETE FORCE 532
- SHOW FILE SYSTEMS 535
- Boot Configuration Files 537
- Chapter 35 543
- BOOT CONFIG-FILE 544
- COPY RUNNING-CONFIG 546
- NO BOOT CONFIG-FILE 549
- SHOW BOOT 550
- SHOW STARTUP-CONFIG 552
- File Transfer 555
- Downloading 557
- Software with 557
- Files to the 558
- Switch with 558
- Uploading Files 559
- 20100601091645.txt 560
- Waiting to send 563
- Chapter 36: File Transfer 564
- File Transfer Commands 567
- COPY FILENAME ZMODEM 568
- COPY FLASH TFTP 569
- COPY TFTP FLASH 570
- COPY ZMODEM 572
- Snooping 575
- (IGMP) Snooping 577
- Host Node Topology 580
- Enabling IGMP Snooping 581
- Disabling IGMP Snooping 584
- Displaying IGMP Snooping 585
- IGMP Snooping Commands 587
- CLEAR IP IGMP 588
- IP IGMP LIMIT 589
- IP IGMP QUERIER-TIMEOUT 590
- IP IGMP SNOOPING 591
- IP IGMP SNOOPING MROUTER 594
- IP IGMP STATUS 595
- NO IP IGMP SNOOPING 596
- NO IP IGMP SNOOPING MROUTER 597
- SHOW IP IGMP SNOOPING 598
- Assigning 603
- Multiple Queriers 603
- .2 Enabled Enabled Active 604
- .3 Enabled Disabled None 605
- .4 Enabled Enabled Standby 605
- Configuring 608
- Chapter 41 611
- IP IGMP QUERY-INTERVAL 612
- IP IGMP SNOOPING QUERIER 613
- NO IP IGMP SNOOPING QUERIER 614
- SHOW IP IGMP INTERFACE 615
- DHCP Snooping Commands 617
- ARP SECURITY 619
- ARP SECURITY VIOLATION 620
- CLEAR ARP SECURITY STATISTICS 622
- IP DHCP SNOOPING 626
- IP DHCP SNOOPING AGENT-OPTION 627
- IP DHCP SNOOPING BINDING 629
- IP DHCP SNOOPING MAX-BINDINGS 633
- IP DHCP SNOOPING TRUST 637
- IP DHCP VERIFY MAC-ADDRESS 638
- IP DHCP SNOOPING VIOLATION 640
- IP SOURCE BINDING 642
- SERVICE DHCP SNOOPING 644
- SHOW ARP SECURITY 646
- SHOW ARP SECURITY INTERFACE 648
- SHOW ARP SECURITY STATISTICS 650
- SHOW IP DHCP SNOOPING 652
- SHOW IP DHCP SNOOPING BINDING 654
- SHOW IP SOURCE BINDING 658
- Event Messages 661
- Event Log 663
- Displaying the Event Log 665
- Clearing the Event Log 666
- Event Log Commands 667
- CLEAR LOG 669
- CLEAR LOG BUFFERED 670
- CLEAR LOG PERMANENT 671
- LOG BUFFERED 672
- LOG CONSOLE 674
- LOG PERMANENT 676
- NO LOG BUFFERED 677
- OUtputID Type Status Details 678
- NO LOG CONSOLE 679
- NO LOG PERMANENT 680
- SHOW LOG 682
- SHOW LOG CONFIG 685
- SHOW LOG PERMANENT 687
- SHOW LOG PERMANENT TAIL 688
- SHOW LOG REVERSE 689
- SHOW LOG TAIL 690
- Syslog Client 691
- program 693
- Chapter 45: Syslog Client 694
- Syslog Client Commands 699
- LOG HOST 700
- NO LOG HOST 702
- Port Trunks 705
- Static Port Trunks 707
- Source IP Address (Layer 3) 709
- Displaying Static Port Trunks 715
- Static Port Trunk Commands 717
- NO STATIC-CHANNEL-GROUP 718
- PORT-CHANNEL LOAD-BALANCE 719
- SHOW STATIC-CHANNEL-GROUP 721
- STATIC-CHANNEL-GROUP 722
- Chapter 49 725
- Load Distribution 727
- Creating New Aggregators 729
- Adding Ports to Aggregators 731
- Deleting Aggregators 733
- Displaying Aggregators 734
- LACP Commands 737
- CHANNEL-GROUP 738
- LACP SYSTEM-PRIORITY 740
- NO CHANNEL-GROUP 741
- SHOW ETHERCHANNEL 744
- SHOW ETHERCHANNEL DETAIL 745
- Chapter 50: LACP Commands 746
- SHOW ETHERCHANNEL SUMMARY 747
- SHOW LACP SYS-ID 748
- SHOW PORT ETHERCHANNEL 749
- Spanning Tree Protocols 751
- STP, RSTP and MSTP Protocols 753
- Path Costs and Port Costs 756
- Port Priority 757
- Point-to-Point and Edge Ports 760
- Mixed STP and RSTP Networks 762
- Spanning Tree and VLANs 763
- RSTP and MSTP BPDU Guard 764
- STP, RSTP, MSTP Loop Guard 766
- STP and RSTP Root Guard 771
- Spanning Tree Protocol (STP) 773
- Setting the Switch Parameters 776
- Setting the Port Parameters 778
- Displaying STP Settings 780
- STP Commands 781
- Chapter 53: STP Commands 782
- NO SPANNING-TREE STP ENABLE 783
- SHOW SPANNING-TREE 784
- SPANNING-TREE FORWARD-TIME 786
- SPANNING-TREE GUARD ROOT 787
- SPANNING-TREE HELLO-TIME 788
- SPANNING-TREE MAX-AGE 789
- SPANNING-TREE MODE STP 790
- SPANNING-TREE PATH-COST 791
- SPANNING-TREE PORTFAST 792
- SPANNING-TREE STP ENABLE 796
- Setting the 800
- Forward Time 800
- Hello Time, and 800
- Setting the Bridge 801
- Priority 801
- Enabling or 801
- Disabling BPDU 801
- Configuring Port 803
- Displaying RSTP Settings 808
- RSTP Commands 809
- Chapter 55: RSTP Commands 810
- NO SPANNING-TREE PORTFAST 811
- NO SPANNING-TREE LOOP-GUARD 813
- NO SPANNING-TREE RSTP ENABLE 815
- SPANNING-TREE LINK-TYPE 823
- SPANNING-TREE LOOP-GUARD 824
- SPANNING-TREE MODE RSTP 826
- SPANNING-TREE RSTP ENABLE 832
- Chapter 56 833
- MSTI Guidelines 838
- VLAN and MSTI Associations 839
- Ports in Multiple MSTIs 840
- Summary of Guidelines 846
- Associating VLANs to MSTIs 848
- MSTP Root Guard 852
- MSTP Commands 853
- Chapter 57: MSTP Commands 854
- INSTANCE MSTI-ID PRIORITY 855
- INSTANCE MSTI-ID VLAN 857
- NO SPANNING-TREE MSTP ENABLE 860
- SHOW SPANNING-TREE MST CONFIG 862
- SHOW SPANNING-TREE MST 863
- SPANNING-TREE MODE MSTP 868
- SPANNING-TREE MSTP ENABLE 869
- SPANNING-TREE MST INSTANCE 871
- <region-name> 875
- REVISION 876
- Virtual LANs 877
- Port-based and Tagged VLANs 879
- Port-based VLANs 881
- Tagged VLANs 881
- Port-based VLAN Overview 882
- Port VLAN 883
- Identifier 883
- Port-based 885
- Example 1 885
- Example 2 886
- Tagged VLAN Overview 888
- Tagged VLAN 890
- Creating VLANs 893
- Adding Tagged Ports to VLANs 896
- Deleting VLANs 900
- Displaying the VLANs 901
- Port-based and Tagged VLAN 903
- NO SWITCHPORT ACCESS VLAN 904
- NO SWITCHPORT TRUNK 905
- SHOW VLAN 908
- SWITCHPORT ACCESS VLAN 910
- SWITCHPORT MODE ACCESS 912
- SWITCHPORT MODE TRUNK 913
- SWITCHPORT TRUNK ALLOWED VLAN 915
- SWITCHPORT TRUNK NATIVE VLAN 918
- Chapter 60 923
- Figure 172. GVRP Example 925
- GVRP and Network Security 928
- Enabling GVRP on the Switch 930
- Enabling GIP on the Switch 931
- Enabling GVRP on the Ports 932
- Setting the GVRP Timers 933
- Disabling GVRP on the Ports 935
- Disabling GIP on the Switch 936
- Disabling GVRP on the Switch 937
- Displaying GVRP 939
- CONVERT DYNAMIC VLAN 943
- GVRP APPLICANT STATE ACTIVE 944
- GVRP APPLICANT STATE NORMAL 945
- GVRP ENABLE 946
- GVRP REGISTRATION 947
- GVRP TIMER JOIN 948
- GVRP TIMER LEAVE 949
- GVRP TIMER LEAVEALL 950
- NO GVRP ENABLE 951
- NO GVRP TIMER JOIN 952
- NO GVRP TIMER LEAVE 953
- NO GVRP TIMER LEAVEALL 954
- PURGE GVRP 955
- SHOW GVRP APPLICANT 956
- SHOW GVRP CONFIGURATION 957
- SHOW GVRP MACHINE 958
- SHOW GVRP STATISTICS 959
- Receive GARP Messages: Empty 960
- Transmit GARP Messages: Empty 960
- SHOW GVRP TIMER 961
- MAC Address-based VLANs 963
- VLANs that Span 967
- Switches 967
- General Steps 970
- Removing MAC Addresses 973
- Displaying VLANs 975
- Chapter 63 979
- macaddress 981
- SHOW VLAN MACADDRESS 984
- VLAN MACADDRESS 986
- Sales and the VID 3: 987
- Private Port VLANs 993
- Private VLAN 995
- Functionality 995
- Creating Private VLANs 997
- Adding Host and Uplink Ports 998
- Displaying Private VLANs 1000
- Private Port VLAN Commands 1001
- PRIVATE-VLAN 1003
- SHOW VLAN PRIVATE-VLAN 1004
- Voice VLAN Commands 1007
- NO SWITCHPORT VOICE VLAN 1008
- SWITCHPORT VOICE DSCP 1009
- SWITCHPORT VOICE VLAN 1010
- Confirmation Command 1011
- Port Security 1013
- Chapter 67 1015
- Overview 1016
- Configuring Ports 1018
- Displaying Port Settings 1022
- INTERFACE Command 1023
- Commands 1025
- NO SWITCHPORT PORT-SECURITY 1026
- SHOW PORT-SECURITY INTERFACE 1028
- Parameter 1031
- SWITCHPORT PORT-SECURITY 1033
- Chapter 69 1039
- Authentication Process 1041
- Port Roles 1042
- Single-host mode 1046
- Multi-host mode 1046
- Multi-supplicant mode 1046
- Multi-Supplicant 1048
- Supplicant VLAN 1052
- Attributes on the 1052
- RADIUS Server 1052
- Guest VLAN 1053
- Guidelines 1054
- Configuring the 1058
- Operating Modes 1058
- Configuring Reauthentication 1060
- Configuring Supplicant Ports 1062
- Removing Ports 1064
- Supplicant Role 1064
- Control Commands 1069
- AUTH DYNAMIC-VLAN-CREATION 1074
- AUTH GUEST-VLAN 1076
- AUTH HOST-MODE 1077
- AUTH REAUTHENTICATION 1079
- AUTH TIMEOUT QUIET-PERIOD 1080
- AUTH TIMEOUT REAUTH-PERIOD 1081
- AUTH TIMEOUT SERVER-TIMEOUT 1082
- AUTH TIMEOUT SUPP-TIMEOUT 1083
- AUTH-MAC ENABLE 1084
- AUTH-MAC REAUTH-RELEARNING 1085
- DOT1X CONTROL-DIRECTION 1086
- DOT1X EAP 1088
- DOT1X INITIALIZE INTERFACE 1090
- DOT1X MAX-REAUTH-REQ 1091
- DOT1X PORT-CONTROL AUTO 1092
- DOT1X PORT-CONTROL SUPPLICANT 1095
- DOT1X TIMEOUT TX-PERIOD 1101
- NO AUTH DYNAMIC-VLAN-CREATION 1103
- NO AUTH GUEST-VLAN 1104
- NO AUTH REAUTHENTICATION 1105
- NO AUTH-MAC ENABLE 1106
- NO DOT1X PORT-CONTROL 1107
- SHOW AUTH-MAC INTERFACE 1109
- SHOW DOT1X 1113
- SHOW DOT1X INTERFACE 1114
- Section X 1119
- SNMPv1 and SNMPv2c 1121
- Enabling SNMPv1 and SNMPv2c 1124
- Creating Community Strings 1125
- Deleting Community Strings 1128
- Disabling SNMPv1 and SNMPv2c 1129
- Displaying SNMPv1 and SNMPv2c 1130
- Exec mode: 1131
- SNMPv1 and SNMPv2c Commands 1133
- NO SNMP-SERVER 1135
- NO SNMP-SERVER COMMUNITY 1136
- NO SNMP-SERVER ENABLE TRAP 1137
- Global Configuration mode 1138
- NO SNMP-SERVER HOST 1139
- NO SNMP-SERVER VIEW 1141
- NO SNMP TRAP LINK-STATUS 1142
- SHOW RUNNING-CONFIG SNMP 1143
- SHOW SNMP-SERVER 1144
- SHOW SNMP-SERVER COMMUNITY 1145
- SHOW SNMP-SERVER VIEW 1147
- SNMP-SERVER 1148
- SNMP-SERVER COMMUNITY 1149
- SNMP-SERVER ENABLE TRAP 1150
- SNMP-SERVER ENABLE TRAP AUTH 1151
- SNMP-SERVER HOST 1152
- SNMP-SERVER VIEW 1154
- SNMP TRAP LINK-STATUS 1156
- SNMPv3 Commands 1157
- Chapter 73: SNMPv3 Commands 1158
- NO SNMP-SERVER ENGINEID LOCAL 1160
- NO SNMP-SERVER GROUP 1161
- NO SNMP-SERVER USER 1164
- SHOW SNMP-SERVER GROUP 1167
- SHOW SNMP-SERVER HOST 1168
- SHOW SNMP-SERVER USER 1169
- SNMP-SERVER ENGINEID LOCAL 1172
- SNMP-SERVER GROUP 1173
- SNMP-SERVER USER 1177
- Network Management 1181
- Chapter 74 1183
- Configuring the sFlow Agent 1186
- Configuring the Ports 1187
- Polling Interval 1188
- Enabling the sFlow Agent 1189
- Disabling the sFlow Agent 1190
- Displaying the sFlow Agent 1191
- Configuration Example 1192
- Chapter 74: sFlow Agent 1194
- Chapter 75 1195
- NO SFLOW COLLECTOR IP 1196
- NO SFLOW ENABLE 1197
- SFLOW COLLECTOR IP 1198
- SFLOW ENABLE 1199
- SFLOW POLLING-INTERVAL 1200
- SFLOW SAMPLING-RATE 1202
- SHOW SFLOW 1204
- LLDP and LLDP-MED 1207
- Mandatory 1209
- LLDP TLVs 1209
- Optional LLDP 1209
- MED TLVs 1211
- Chapter 76: LLDP and LLDP-MED 1214
- port-description 1216
- link-aggregation 1216
- mac-phy-config 1216
- Capabilities 1218
- Network-policy 1218
- Use the SHOW LLDP 1219
- INTERFACE command to confirm 1219
- Removing LLDP TLVs from Ports 1229
- Displaying Port TLVs 1237
- LLDP and LLDP-MED Commands 1239
- CLEAR LLDP STATISTICS 1242
- CLEAR LLDP TABLE 1243
- LLDP HOLDTIME-MULTIPLIER 1244
- LLDP LOCATION 1245
- LLDP MANAGEMENT-ADDRESS 1247
- LLDP MED-NOTIFICATIONS 1249
- LLDP MED-TLV-SELECT 1250
- LLDP NOTIFICATIONS 1253
- LLDP NOTIFICATION-INTERVAL 1254
- LLDP REINIT 1255
- LLDP RUN 1256
- LLDP TIMER 1257
- LLDP TLV-SELECT 1258
- LLDP TRANSMIT RECEIVE 1261
- LLDP TX-DELAY 1262
- LOCATION CIVIC-LOCATION 1263
- LOCATION COORD-LOCATION 1266
- LOCATION ELIN-LOCATION 1269
- NO LLDP MED-NOTIFICATIONS 1270
- NO LLDP MED-TLV-SELECT 1271
- NO LLDP NOTIFICATIONS 1273
- NO LLDP RUN 1274
- NO LLDP TLV-SELECT 1275
- NO LLDP TRANSMIT RECEIVE 1276
- NO LOCATION 1277
- SHOW LLDP 1279
- SHOW LLDP INTERFACE 1281
- SHOW LLDP NEIGHBORS DETAIL 1285
- Voice VLAN ID 1288
- SHOW LLDP NEIGHBORS INTERFACE 1290
- SHOW LLDP STATISTICS 1292
- SHOW LOCATION 1296
- Chapter 78 1299
- Adding Static ARP Entries 1301
- Displaying the ARP Table 1303
- CLEAR ARP-CACHE 1308
- NO ARP (IP ADDRESS) 1309
- SHOW ARP 1310
- Chapter 80 1313
- RMON Port Statistics 1315
- Viewing Statistics 1316
- Deleting Statistics 1316
- RMON Histories 1317
- Displaying 1318
- History Groups 1318
- Deleting History 1319
- RMON Alarms 1320
- Creating RMON 1321
- Statistics Groups 1321
- Creating an 1323
- Alarm - Example 1323
- Enter_log_message 1324
- Chapter 80: RMON 1326
- Phase 3: Creating the Event 1327
- Phase 4: Creating the Alarm 1327
- Use the SHOW RMON ALARM 1328
- RMON Commands 1329
- Chapter 81: RMON Commands 1330
- NO RMON ALARM 1331
- NO RMON COLLECTION HISTORY 1332
- NO RMON COLLECTION STATS 1333
- NO RMON EVENT 1334
- RMON ALARM 1335
- RMON COLLECTION HISTORY 1338
- RMON COLLECTION STATS 1340
- RMON EVENT LOG 1341
- RMON EVENT LOG TRAP 1342
- RMON EVENT TRAP 1344
- SHOW RMON ALARM 1346
- SHOW RMON EVENT 1348
- SHOW RMON HISTORY 1350
- SHOW RMON STATISTICS 1352
- Management Security 1353
- Local Manager Accounts 1355
- Password 1357
- Encryption 1357
- Configuration 1365
- Chapter 83 1367
- ENABLE PASSWORD 1368
- NO ENABLE PASSWORD 1370
- NO USERNAME 1372
- SERVICE PASSWORD-ENCRYPTION 1373
- USERNAME 1374
- Telnet Server 1377
- Enabling the Telnet Server 1379
- Disabling the Telnet Server 1380
- Displaying the Telnet Server 1381
- Chapter 84: Telnet Server 1382
- Telnet Server Commands 1383
- NO SERVICE TELNET 1384
- SERVICE TELNET 1385
- SHOW TELNET 1386
- Telnet Client 1387
- Chapter 86: Telnet Client 1390
- Telnet Client Commands 1391
- TELNET IPV6 1393
- Secure Shell (SSH) Server 1395
- Support for SSH 1397
- SSH and Enhanced Stacking 1399
- Enabling the SSH Server 1402
- Disabling the SSH Server 1403
- Deleting Encryption Keys 1404
- Displaying the SSH Server 1405
- SSH Server Commands 1407
- CRYPTO KEY DESTROY HOSTKEY 1408
- CRYPTO KEY GENERATE HOSTKEY 1410
- NO SERVICE SSH 1412
- SERVICE SSH 1413
- SHOW CRYPTO KEY HOSTKEY 1414
- SHOW SSH SERVER 1415
- Chapter 90 1417
- HTTP server enabled. Port 80 1422
- SERVICE HTTP 1424
- IP HTTP PORT 1425
- NO SERVICE HTTP 1426
- SHOW IP HTTP 1427
- Chapter 92 1429
- Distinguished 1431
- generate 1433
- CRYPTO CERTIFICATE DESTROY 1444
- CRYPTO CERTIFICATE GENERATE 1445
- CRYPTO CERTIFICATE IMPORT 1448
- CRYPTO CERTIFICATE REQUEST 1449
- SERVICE HTTPS 1451
- IP HTTPS CERTIFICATE 1452
- NO SERVICE HTTPS 1453
- SHOW CRYPTO CERTIFICATE 1454
- SHOW IP HTTPS 1455
- RADIUS and TACACS+ Clients 1457
- Remote Manager Accounts 1459
- Managing the RADIUS Client 1462
- Specifying a 1463
- RADIUS Global 1463
- Encryption Key 1463
- Specifying the 1463
- Server Timeout 1463
- Deleting Server 1465
- IP Addresses 1465
- Displaying the 1465
- RADIUS Client 1465
- Managing the TACACS+ Client 1466
- RADIUS and TACACS+ Client 1473
- AAA ACCOUNTING LOGIN 1475
- Confirmation Commands 1476
- tacacs [ 1477
- AAA AUTHENTICATION LOGIN 1479
- IP RADIUS SOURCE-INTERFACE 1481
- LOGIN AUTHENTICATION 1483
- NO LOGIN AUTHENTICATION 1485
- NO RADIUS-SERVER HOST 1486
- NO TACACS-SERVER HOST 1487
- RADIUS-SERVER HOST 1488
- RADIUS-SERVER KEY 1490
- RADIUS-SERVER TIMEOUT 1491
- SHOW RADIUS 1492
- SHOW TACACS 1494
- TACACS-SERVER HOST 1496
- TACACS-SERVER KEY 1497
- TACACS-SERVER TIMEOUT 1498
- Quality of Service 1499
- Chapter 96 1501
- Creating ACLs 1505
- Creating 1517
- Numbered MAC 1517
- Creating Named 1519
- IPv4 Address 1519
- IPv6 Address 1521
- Assigning ACLs to Ports 1523
- Assigning MAC 1524
- Address ACLs to 1524
- Assigning Named 1525
- IPv4 ACLs 1525
- IPv6 ACLs 1526
- Removing ACLs from Ports 1527
- Removing Named 1528
- Deleting ACLs from the Switch 1530
- Setting ACL Time Ranges 1533
- Displaying the ACLs 1535
- ACL Commands 1539
- Chapter 97: ACL Commands 1540
- ABSOLUTE START 1542
- ACCESS-CLASS 1544
- ACCESS-GROUP 1546
- ACCESS-LIST (MAC Address) 1548
- ACCESS-LIST ICMP 1551
- ACCESS-LIST IP 1554
- ACCESS-LIST PROTO 1558
- ACCESS-LIST TCP 1563
- ACCESS-LIST UDP 1567
- IP ACCESS-LIST 1571
- IP ACCESS-LIST (ICMP) 1572
- IP ACCESS-LIST (IP) 1575
- IP ACCESS-LIST (MAC) 1578
- IP ACCESS-LIST (PROTO) 1581
- IP ACCESS-LIST (TCP) 1584
- IP ACCESS-LIST (UDP) 1588
- IPV6 ACCESS-LIST 1592
- IPV6 ACCESS-LIST (ICMP) 1593
- IPV6 ACCESS-LIST (IP) 1596
- IPV6 ACCESS-LIST (PROTO) 1599
- IPV6 ACCESS-LIST (TCP) 1602
- IPV6 ACCESS-LIST (UDP) 1606
- IPV6 TRAFFIC-FILTER 1610
- MAC ACCESS-GROUP 1611
- NO ACCESS-LIST 1612
- NO ACCESS-GROUP 1613
- NO MAC ACCESS-GROUP 1614
- PERIODIC 1615
- PERIODIC (DAILY) 1617
- 5 pm Friday evening: 1618
- 6 pm Sunday evening: 1618
- SHOW ACCESS-LIST 1619
- SHOW INTERFACE ACCESS-GROUP 1621
- SHOW IPV6 ACCESS-LIST 1622
- SHOW TIME-RANGE 1623
- TIME-RANGE 1624
- Quality of Service (QoS) 1625
- Peak Information Rate (PIR) 1627
- Peak Burst Size (PBS) 1627
- Enabling QoS on the Switch 1628
- Creating a Class Map 1629
- Filtering 1630
- Procedures 1630
- Adding a VLAN to a Class Map 1635
- Creating a Policy Map 1636
- Deny unspecified traffic 1638
- Prioritizing CoS and DSCP 1639
- Creating a Twin-rate Policer 1642
- Creating an Aggregate Policer 1644
- Command Description 1646
- Configuring the Egress Queues 1647
- Determining the 1648
- Egress Queues 1648
- Egress Queue 1652
- <0-15> 1653
- Auto-QoS Macro 1656
- Auto-QoS Functionality 1659
- Auto-QoS-MED 1661
- Macro Examples 1661
- Support 1663
- Displaying QoS Settings 1668
- Displaying QoS 1669
- Displaying a 1669
- Class Map 1669
- Displaying CoS to 1671
- Queue Mappings 1671
- Displaying DSCP 1672
- Mappings 1672
- <0-63> 1674
- Chapter 99 1675
- AUTO-QOS 1679
- AUTO-QOS-MED 1681
- CLASS-MAP 1685
- DEFAULT-ACTION 1686
- DESCRIPTION (Policy Map) 1688
- MATCH ACCESS-GROUP 1690
- MATCH COS 1693
- MATCH DSCP 1695
- MATCH IP-PRECEDENCE 1696
- MATCH MAC-TYPE 1697
- MATCH PROTOCOL 1699
- ARP to it: 1703
- MATCH TCP-FLAGS 1704
- MATCH VLAN 1706
- MLS QOS COS 1713
- MLS QOS ENABLE 1715
- MLS QOS MAP COS-QUEUE 1716
- MLS QOS MAP DSCP-QUEUE 1718
- MLS QOS MAP POLICED-DSCP 1720
- <VLANID> 1722
- NO MATCH ACCESS-GROUP 1724
- NO MATCH PROTOCOL 1726
- NO MLS QOS AGGREGATE-POLICE 1728
- NO MLS QOS ENABLE 1729
- NO POLICE AGGREGATE 1730
- POLICE AGGREGATE 1731
- POLICE SINGLE-RATE ACTION 1733
- POLICE TWIN-RATE ACTION 1735
- minimum burst size 1736
- maximum rate 1736
- maximum burst size 1736
- POLICY-MAP 1737
- <0-7> 1738
- SET DSCP 1740
- SET QUEUE 1741
- SERVICE-POLICY INPUT 1743
- SHOW CLASS-MAP 1744
- SHOW POLICY-MAP 1745
- SHOW MLS QOS 1747
- SHOW MLS QOS INTERFACE 1750
- (continued) 1751
- SHOW MLS QOS MAPS COS-QUEUE 1753
- SHOW MLS QOS MAPS DSCP-QUEUE 1754
- MAP DSCP-QUEUE” on page 1718 1755
- TRUST DSCP 1758
- [0 1760
- WRR-QUEUE WEIGHT 1762
- QoS Storm Control Protection 1765
- <1 - 86400> 1767
- <1 - 10000000> 1767
- <100 - 6000> 1768
- Enabling Policy-Based QSP 1769
- Disabling a 1770
- Shutting Down a 1772
- Displaying Port Storm Status 1775
- QSP Commands 1777
- STORM-ACTION 1780
- “cmap2:” 1781
- STORM-DOWNTIME 1782
- STORM-PROTECTION 1783
- STORM-RATE 1784
- STORM-WINDOW 1786
- “cmap5:' 1787
- Chapter 101: QSP Commands 1788
- Section XIV 1789
- Chapter 102 1791
- Routing Interfaces 1793
- Static Routes 1794
- Default Route 1797
- Routing Table 1798
- 1024 static entries 1799
- 1024 dynamic entries 1799
- Creating the 1803
- Interfaces 1804
- Adding Static and 1806
- Default Routes 1806
- IPv4 Routing Commands 1811
- IP ADDRESS 1813
- IP ADDRESS DHCP 1815
- IP ROUTE 1816
- NO IP ADDRESS 1819
- NO IP ADDRESS DHCP 1821
- NO IP ROUTE 1823
- SHOW IP INTERFACE 1825
- SHOW IP ROUTE 1827
- Chapter 104 1829
- Enabling RIP 1831
- Specifying a RIP Version 1833
- Enabling Authentication 1834
- S1> enable 1836
- S1# configure terminal 1836
- S1(config)# router rip 1836
- S1(config-if)# auto-summary 1837
- Advertising the Default Route 1839
- RIP command 1840
- Adjusting Timers 1841
- AUTO-SUMMARY 1846
- DEFAULT-INFORMATION ORIGINATE 1847
- IP RIP AUTHENTICATION STRING 1848
- IP RIP AUTHENTICATION MODE 1849
- IP RIP RECEIVE-PACKET 1850
- IP RIP RECEIVE VERSION 1851
- IP RIP SEND-PACKET 1853
- IP RIP SEND VERSION 1854
- IP RIP SPLIT-HORIZON 1855
- NO AUTO-SUMMARY 1859
- NO IP RIP AUTHENTICATION MODE 1861
- NO IP RIP RECEIVE-PACKET 1863
- NO IP RIP RECEIVE VERSION 1864
- NO IP RIP SEND-PACKET 1865
- NO IP RIP SEND VERSION 1866
- NO IP RIP SPLIT-HORIZON 1867
- NO NETWORK 1868
- NO PASSIVE-INTERFACE 1869
- NO ROUTER RIP 1870
- NO TIMERS BASIC 1871
- NO VERSION 1872
- PASSIVE-INTERFACE 1873
- ROUTER RIP 1874
- SHOW IP RIP 1875
- SHOW IP RIP COUNTER 1877
- SHOW IP RIP INTERFACE 1879
- TIMERS BASIC 1881
- System Monitoring Commands 1885
- SHOW CPU 1886
- SHOW CPU HISTORY 1887
- SHOW CPU USER-THREADS 1888
- SHOW MEMORY 1889
- SHOW MEMORY ALLOCATION 1890
- SHOW MEMORY HISTORY 1891
- SHOW MEMORY POOLS 1892
- SHOW PROCESS 1893
- SHOW SYSTEM INTERRUPTS 1895
- SHOW TECH-SUPPORT 1896
- Appendix B 1899
- “Web Server” on page 1930 1900
- Boot Configuration File 1901
- Class of Service 1902
- Console Port 1903
- DHCP Relay 1904
- Enhanced Stacking 1907
- IGMP Snooping 1909
- IGMP Snooping Querier 1910
- MAC Address Table 1913
- Management IP Address 1914
- Manager Account 1915
- Port Settings 1916
- Secure Shell Server 1920
- SNMP Status Disabled 1922
- Simple Network Time Protocol 1923
- Multiple 1925
- Spanning Tree 1925
- Protocol 1925
- System Name 1926
- TACACS+ Client 1927
- Web Server 1930
- Command Index 1931
Relacionado con productos y manuales para Hardware De La Computadora Allied-telesis AT-FS970M Series
Hardware De La Computadora Allied-telesis AT-S95 CLI (AT-8000GS Series) Manual de usuario
(397 paginas)
(397 paginas)
Hardware De La Computadora Allied-telesis AT-S94 CLI (AT-8000S Series) Manual de usuario
(402 paginas)
(402 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.615 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales