Allied-telesis AT-FS717FC/SC Manual de usuario Pagina 31

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 69
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 30
AT-FS717FC/SC Fast Ethernet Switch Installation Guide
31
Warning
Power cord is used as a disconnection device: To de-energize
equipment, disconnect the power cord. 5
6. Verify that the POWER LED is green. If the LED is OFF, refer to
“Installation” on page 25 for instructions.
Note
The switch perform a self-diagnostic test upon power up. This takes
about 20 seconds to complete.
7. Power ON the end-nodes connected to the switch.
8. Check that all the LINK/ACT LEDs are green. If any of the LEDs is
OFF, refer to “Installation” on page 25 for instructions.
The switch is now ready for use.
Vista de pagina 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 68 69

Comentarios a estos manuales

Sin comentarios