Allied-telesis AT-9448Ts/XP (Basic Layer 3) Manual de usuario Pagina 69

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 82
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 68
AT-9400 Series Gigabit Ethernet Switches Installation Guide
69
Transceiver is Installed but the Status is “Not Present”
If a GBIC, SFP, or XFP transceiver is installed in a transceiver slot but the
Uplink Information menu in the AT-S63 Management Software interface
displays “Not Present” for that port, do the following:
Verify that the transceiver is completely inserted in the slot on the front
of the switch.
Note
The uplink status does not reflect whether a fiber optic cable is
connected to the transceiver.
Vista de pagina 68
1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 81 82

Comentarios a estos manuales

Sin comentarios