Allied-telesis AT-9448Ts/XP (Basic Layer 3) Manual de usuario Pagina 56

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 82
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 55
Chapter 2: Installing the Switch
56
3. Position the transceiver with the label facing up.
4. Slide the transceiver into the slot until it clicks into place.
Figure 22. Installing an SFP Transceiver
5. Verify that the handle on the SFP transceiver is in the upright position,
as shown in Figure 23, to prevent inadvertently removing the
transceiver.
Figure 23. Positioning the SFP Handle in the Upright Position
6. Repeat this procedure to install another SFP transceiver or go to
“Cabling the Twisted Pair or Fiber Optic Ports” on page 59.
For SFP optical and cabling specifications, consult the documentation
shipped with the module.
SFP Handle
Vista de pagina 55
1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 81 82

Comentarios a estos manuales

Sin comentarios