Allied-telesis AT-8116 Manual de usuario descargar pdf (Pagina 74)

Using an SNMP Manager

15-2

IP Setup 1. Modify the system IP configuration to match your IP network. Use

the set-ip-cfg command in order to provide an IP address, a

netmask and a broadcast address (see IP Commands). For

example:

set-ip-cfg 129.001.001.064 255 255.255.255.0

129.001.001.000

Check that the actual IP conﬁguration matches the desired one:

SYS_console>get-ip-cfg

The device IP address, netmask and broadcast are:

IP address: 129.001.001.064

IP netmask:255.255.255.000

IP broadcast: 129.001.001.000

2. Set the default gateway address using the set-gatew command.

This should be a station that can route IP packets to non-local IP

networks. For example:

SYS_console>set-gatew 129.1.1.1

3. Confirm that the default gateway IP address was properly

accepted:

SYS_console>get-gatew

Device default gateway address is :

129.001.001.001

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 87 88

Sin comentarios

Allied-telesis AT-8116 Manual de usuario Pagina 74