Allied-telesis AT-8116 Manual de usuario Pagina 30

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 88
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 29
IP Commands
5-4
get-gatew
Shows default gateway. This command shows which default route
will be used to access a different IP network.
SYS_console>get-gatew
The default gateway address is:
194.090.136.254
SYS_console>
set-gatew
Sets the default gateway IP Address. This command lets you specify
the address of the router used to access a different IP for network
management packets or Ping. However, if not set, then all packets
remain in the local network. The default value for the default
gateway IP address is 0.0.0.0.
set-gatew <IPaddress>
SYS_console>set-gatew 194.90.136.254
Device Default Gateway change in the NVRAM OK
Device Default Gateway changed to:
194.90.136.254
SYS_console>
Vista de pagina 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 87 88

Comentarios a estos manuales

Sin comentarios