Allied-telesis AlliedView-EMS 3.10 DEVICE MANAGEMENT Manual de usuario Pagina 269

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 367
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 268
AlliedView™-EMS 3.10 Device Management Guide Page 269 of 367
AT-9816GB
Device Manager LEDs for AT-9800 Series
LED State Description
PWR Green
Red
The switch is receiving power from the main power supply.
Main power supply is either off or has failed.
RPS Green
Red
Gray
The switch is receiving power from the redundant power supply.
RPS has failed.
RPS is not installed or RPS monitoring is disabled.
DUPLEX Green
Orange
The port is operating at full duplex.
The port is operating at half duplex.
Note - AT-9812T, AT-9812TF and AT-9812T-DC share the same device image.
Note - AT-9816GB, AT-9816GF and AT-9816GB-DC share the same device image.
Note - To turn RPS monitoring on or off on the switch, enter the command SET SYSTEM
RPSMONITOR={ON|OFF} from the command line interface. To see whether RPS
monitoring is on, use the command SHOW SYSTEM. To turn on RPS monitoring using
SNMP, set the fanAndPsRpsMonitoringStatus variable to on.
Note - The current firmware version does not allow Device Manager to support the RPS
LED on the DC models.
Vista de pagina 268
1 2 ... 264 265 266 267 268 269 270 271 272 273 274 ... 366 367

Comentarios a estos manuales

Sin comentarios