Allied-telesis AT-S80 Manual de usuario descargar pdf (Pagina 33)

AT-S80 Management Software User’s Guide

Section I: Using the Menus Interface 33

2. From the Basic Switch Configuration Menu, type I to select System IP

Configuration.

The System IP Configuration Menu is shown in Figure 5.

Figure 5. System IP Configuration Menu

The top portion of the menu displays the current IP address, subnet

mask, and gateway address for the switch. The menu displays the

switch’s MAC address, which cannot be changed. The menu also

displays the current status of the DHCP client on the switch.

The Enable/Disable DHCP Mode option is described in “Enabling and

Disabling the DHCP Client” on page 35.

3. To set the switch’s IP address, do the following:

a. Type I to select Set IP Address.

The following prompt is displayed:

Enter new IP address>

b. Type the IP address for the switch and press Enter.

4. To set the switch’s subnet mask, do the following:

a. Type M to select Set Subnet Mask.

The following prompt is displayed:

Enter new subnet mask>

Basic Switch Configuration -> System IP Configuration Menu

MAC Address: 00:06:5H:B2:65:84

IP Address: 0.0.0.0

Subnet Mask: 0.0.0.0

Default Gateway: 0.0.0.0

DHCP Mode: Disabled

----------------------- <COMMAND> -----------------------------

Set [I]P Address

Set Subnet [M]ask

Set Default [G]ateway

Enable/Disable [D]HCP Mode

[Q]uit to previous menu

Command>

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 345 346

Sin comentarios

Allied-telesis AT-S80 Manual de usuario Pagina 33