Allied Telesis AT-ANC10S/4 Guía de instalación descargar pdf (Pagina 22)

Chapter 1: Introducing the AT-ANC10S/2 and AT-ANC10S/4 Adapters

Figure 2. AT-ANC10S/2 Faceplate

The LEDs for the SFP+ slots are described in Table 2.

AT-ANC10S/4

Adapter

The AT-ANC10S/4 adapter, shown in Figure 3 on page 23, has four slots

for SFP+ modules that operate at 10 Gbps in full duplex mode. You cannot

change the speed or duplex mode of the transceiver slots. The maximum

operating distance of an SFP+ slot will vary depending on the SFP+

Table 2. Network Link and Activity LEDs

Port LED LED State Network State

ACT LED Off The slot is empty or the

transceiver in the slot is not

transmitting or receiving

network traffic.

Blinking The transceiver in the slot is

transmitting or receiving

network traffic.

LNK LED Off The slot is empty or the

transceiver has not

established a link to a remote

device.

Steady On The transceiver has

established a link to a remote

device.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 129 130

Sin comentarios

Allied Telesis AT-ANC10S/4 Guía de instalación Pagina 22