Allied Telesis AT-2450 Series Guía de instalación descargar pdf (Pagina 19)

Network Adapter Card Installation Guide

7. For the AT-2450, AT-2500, AT-2501, AT-2700, or AT-2701 Series

adapters, to use the adapter card’s Wake-on-LAN feature in your

computer using an Advanced Configuration and Power Interface

(ACPI), you must connect the Wake-on-LAN cable to the Wake-on-

LAN connector on the adapter card and to the Wake-on-LAN

connector on the motherboard of the computer. For the location of

the Wake-on-LAN connector on the motherboard, refer to the

documentation that came with your computer.

8. Replace the PC’s cover and secure it with the screws removed in

Step 2.

9. Connect the adapter card to the network by connecting the

appropriate data cable.

Note

If you are installing an AT-2450FTX, AT-2700FTX, and AT-2745FX

adapters, connect only one port on the adapter card to the network.

10. Power ON the PC.

You are now ready to install the network adapter driver. You can install a

network adapter driver by performing either of the following

procedures: Running AT-Setup on page 24 or Manually Installing a

Network Adapter Driver on page 31.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 121 122

Sin comentarios

Allied Telesis AT-2450 Series Guía de instalación Pagina 19